Collection of templates.

[maxmixer]

Falle-Safe deep curve set

Copied from crypto.com. Scaled in GIMP. Smoothed in Inkscape. Accurate size at 72 dpi.

I know Exodus 5000 already posted these templates, but to my knowledge, they weren't to scale, so to save people some work, here are the templates I made to use.

http://woz5999.googlepages.com/falle-1-2.vector.png
http://woz5999.googlepages.com/falle-3-4.vector.png
http://woz5999.googlepages.com/falle-5-6.vector.png

its a shame these links are dead.

Does anyone still have a link to these ?

Thanks

maxmix

[maxmixer]

Great thread and so much useful info on the last 10 pages...

Very good

maxmix

Thought I would share my templates with everyone. I put them in pdf form and added a scale to ensure your print outs are the correct size. I hope someone enjoys them.
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNMTg4OWY5OWUtY2QzZS00NWM3LWIwMTctNTJiNDc4MWI0NjBi&hl=en
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNNGY1YzdlN2ItZmExYS00MGJmLThiYzQtMjE5ZDBiMzNkZWU4&hl=en
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNZGFkZmIwMmEtZjY3My00YThhLTk5OWItNmViNzNkYmRkNTRm&hl=en
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNMDkwZmM4YzItNTBkOS00YmM1LTlmMTItYWVlZTAwMzFmNDdj&hl=en
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNNmIzOTYwODAtYjhkOC00ZDE5LTk0NzYtYmRlZTk0ZmQwODQ5&hl=en
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNYjZhMWQwNGYtZjgyZS00MDVlLTkxMWUtZGI1NGNjZGRlNWJm&hl=en
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNNTJkNjcxOTItOWFhOS00ZThiLTk3NTAtODJlY2JlZTViNTMz&hl=en
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNMTM1YmU0MjAtMDk0YS00MzRhLWE3MmUtZWNmNWYwNGM0ZjRl&hl=en

[art118]

Thx I am new to this site I can get into lockers and pick just about any lock this is a great choice of picks and tension wrench

[unlisted]

Thx I am new to this site I can get into lockers and pick just about any lock this is a great choice of picks and tension wrench

Get into lockers eh? care to elaborate?

[LocksmithArmy]

Thought I would share my templates with everyone. I put them in pdf form and added a scale to ensure your print outs are the correct size. I hope someone enjoys them.
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNMTg4OWY5OWUtY2QzZS00NWM3LWIwMTctNTJiNDc4MWI0NjBi&hl=en
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNNGY1YzdlN2ItZmExYS00MGJmLThiYzQtMjE5ZDBiMzNkZWU4&hl=en
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNZGFkZmIwMmEtZjY3My00YThhLTk5OWItNmViNzNkYmRkNTRm&hl=en
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNMDkwZmM4YzItNTBkOS00YmM1LTlmMTItYWVlZTAwMzFmNDdj&hl=en
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNNmIzOTYwODAtYjhkOC00ZDE5LTk0NzYtYmRlZTk0ZmQwODQ5&hl=en
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNYjZhMWQwNGYtZjgyZS00MDVlLTkxMWUtZGI1NGNjZGRlNWJm&hl=en
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNNTJkNjcxOTItOWFhOS00ZThiLTk3NTAtODJlY2JlZTViNTMz&hl=en
http://docs.google.com/fileview?id=0B0YJ24_Gn3pNMTM1YmU0MjAtMDk0YS00MzRhLWE3MmUtZWNmNWYwNGM0ZjRl&hl=en

lets say... WOW awsome job man...

[Angist]

Hello all this is my first time posting on this website so bare with me. I work in a shop where I have access to different kinds of sheet metal stainless and aluminum and i was wondering if someone could point me to the right template for a precise diy beginner.I have access to all different kinds of Bench clamps, anvils, bench shears and files. Any help is greatly appreciated and all of these templates are great I'm just a little overwhelmed. Thank you!

-angist

[zeepia]

Welcome to the forum!

There are tons of templates of different pick shapes but I would suggest you make first one hook, one half diamond and then maybe bogota if you like raking too. Little details in shapes differ from every person´s preferences. With that set you´ll be able to pick most locks. Then you gain more experience for which direction you take your next picks.

Good luck!

[Angist]

Thanks so much, just the info I was looking for. You can read all you want but experience and talking to actual people is the only way I truly grasp things, not unlike most people. That's why I'm happy to be a part of this site. Thanks for helping the noobs!

[fgarci03]

Collection of Templates part 2 here: http://www.lockpicking101.com/viewtopic.php?f=4&t=56484

[markdavies1]

Awesome thanks for the templates.

[gunny]

This really is an OUTSTANDING thread. RAH!!

Semper Fidelis

- Gunny

[Alan5510301]

I had some templates from these forums, and it was tiring to get them to size, so I remade these picks in Photoshop. I don't remember where I got them, just that they're from these forums, so I don't know who to thank for the original photos/scans/templates.
They are at 360 PPI (Pixels Per Inch).
https://lock-picks.googlecode.com/files ... plates.jpg