Lock Picking 101
Lockpicking, Locksmithing, Locksport, Locks and Picks
           

Lock Picking 101
Login
Profile
FAQ
Members
Search
Lock Pick Shop


Information
FAQ & General Information
Locksmith Business
Pick-Fu - Do... Not try.
Got Questions?
General Chatter
Lockpicking 101 Lapel Pin


Hardware
Automatic/Mechanical
Lockpicks - Manual
Locks
Eu Locks, Picks & Hardware
Buy - Sell - Trade


Advanced Locks
Advanced Locks Information
Combo, Electronic & Safes
Automotive Locks and Picks
High Security Locks
Advanced Lock Pick Tools


Locksport Groups
Locksport Local
Chapter President's Office
Locksport Board Room

Featured Picks
Locksmiths
Locksmiths Forum
 

Southord E500XT

Tool recommendations, information on your favorite automatic and/or mechanical lockpicking devices for those with less skills, or looking to make their own.

Moderators: Kaotik, Chucklz, SFGOON

Southord E500XT

Postby Lock_fanatic » Wed Dec 24, 2008 11:00 am

I know this is my first post , but i only have one question so please save the "read the faq" lines for someone else, cuz i already did! :D

I just received my gun this morning, and there seems to be a problem.
I think the pick itself is not working correctly.

Ok, so when i push the trigger button with the tension screw on tightest setting, the pick will hum and run without much bounce just vibrating . But when i loosen the tension screw to achieve more bounce, then try to push the trigger button again it doesnt run at all!....
heres the weird thing ,
when i remove the tension screw itself
i push trigger button and push down lightly with my other hand on the head of the pick with my finger , it will work.


Hope ive painted a clear enough picture for you guys to weigh in here.
So is this how the gun is supposed to work? or i have a faulty gun?


Please let me know what you think?

Thanks in advance guys
Lock_fanatic
 
Posts: 2
Joined: Wed Dec 24, 2008 10:42 am

Re: Southord E500XT

Postby Lock_fanatic » Wed Dec 24, 2008 11:18 am

ah just read that again
im assuming what i posted can be quite confusing

ok one simple question


should the gun run at every single touch of the button normally right?
like regardless of the tension screw and whatever
it should always run after touch of the button?
Lock_fanatic
 
Posts: 2
Joined: Wed Dec 24, 2008 10:42 am

Re: Southord E500XT

Postby zeke79 » Thu Dec 25, 2008 1:02 am

Yes it should always run at the touch of the button.
For the best book out there on high security locks and their operation, take a look at amazon.com for High-Security Mechanical Locks An Encyclopedic Reference. Written by our very own site member Greyman! A true 5 Star read!!
zeke79
Site Admin
 
Posts: 5274
Joined: Tue Sep 02, 2003 3:11 am
Location: USA

Re: Southord E500XT

Postby jasonthekey » Tue Mar 03, 2009 4:45 am

a lot of people think that the electric pick gun works in the same was as the manual just rapidly, there wrong my guess is you over you've been over loosening the tension screw. a good way to remedy the problem is tighten the screw all the way then put your index finger on the swing arm then begin to loosen the screw little by little until you feel some kick back once you feel it kick you've gone to far tighten it just a notch what your looking for is maximum vibration without it kicking this is the highest setting you want. on this setting it will dominate locks as long as you don't go over this setting your gun will be reliable
jasonthekey
 
Posts: 49
Joined: Fri Feb 27, 2009 11:19 am

Re: Southord E500XT

Postby wolfhunter » Thu Mar 26, 2009 11:02 pm

Its a faulty gun and you can send it in to Southord but just let them know by email and they can fix it for you.

I am sending in one today because when the pick goes into the lock (no tension wrench has been inserted) the pick just hums :| so I am going to send mine in...

ALSO VERY IMPORTANT DON'T EVER SEND LOCK PICKS THROUGH (USPS) UNITED STATES POSTAL SERVICE....UPS, DHL, FEDEX ARE FINE....BUT ITS ILLEGAL TO SEND THEM USPS FOR SOME REASON OR ANOTHER. !
wolfhunter
 
Posts: 8
Joined: Fri Jun 29, 2007 3:03 am

Re: Southord E500XT

Postby unlocke » Wed Apr 08, 2009 3:07 am

I have a similar problem myself. The pick will vibrate but only on a very narrow range with that screw in. I push the button otherwise I just hear a click. Well I won't be sending to southord if I can help it. I'm not going to be happy paying over $40 to fix it after I just bought it. I'll contact lockpickshipshop first. I wasn't sure if it was not working properly or if it was just me.

jasonthekey wrote:a lot of people think that the electric pick gun works in the same was as the manual just rapidly, there wrong my guess is you over you've been over loosening the tension screw. a good way to remedy the problem is tighten the screw all the way then put your index finger on the swing arm then begin to loosen the screw little by little until you feel some kick back once you feel it kick you've gone to far tighten it just a notch what your looking for is maximum vibration without it kicking this is the highest setting you want. on this setting it will dominate locks as long as you don't go over this setting your gun will be reliable
.

Maybe that's the problem I'll try that method first. When I first got the pick the otherday it was easily picking locks. I see now I might have pulled the screw out too far.
unlocke
 
Posts: 49
Joined: Sat Mar 14, 2009 9:44 pm

Re: Southord E500XT

Postby Bas2888 » Wed Apr 08, 2009 8:54 pm

wolfhunter wrote:ALSO VERY IMPORTANT DON'T EVER SEND LOCK PICKS THROUGH (USPS) UNITED STATES POSTAL SERVICE....UPS, DHL, FEDEX ARE FINE....BUT ITS ILLEGAL TO SEND THEM USPS FOR SOME REASON OR ANOTHER. !


I've ordered lockpicks 2 times and other lockpicking equipment countless times with USPS and never encountered problems.
If quantum mechanics hasn't profoundly shocked you, you haven't understood it yet.
-Niels Bohr
Bas2888
 
Posts: 65
Joined: Wed Apr 08, 2009 3:54 pm
Location: The Netherlands

Re: Southord E500XT

Postby wolfhunter » Thu Apr 09, 2009 4:01 am

Yes its illegal to send them through USPS...you may have not of had a problem but if you do...you will have the cops after you and your feet in crisco!
wolfhunter
 
Posts: 8
Joined: Fri Jun 29, 2007 3:03 am

Re: Southord E500XT

Postby Bas2888 » Thu Apr 09, 2009 4:09 am

wolfhunter wrote:Yes its illegal to send them through USPS...you may have not of had a problem but if you do...you will have the cops after you and your feet in crisco!


And why do lockpickshops send them using USPS then? I think they are the one to blame then...
So don't talk fairytales :wink:
If quantum mechanics hasn't profoundly shocked you, you haven't understood it yet.
-Niels Bohr
Bas2888
 
Posts: 65
Joined: Wed Apr 08, 2009 3:54 pm
Location: The Netherlands

Re: Southord E500XT

Postby unlisted » Thu Apr 09, 2009 4:38 am

wolfhunter wrote:Yes its illegal to send them through USPS...you may have not of had a problem but if you do...you will have the cops after you and your feet in crisco!

I would have to not agree with your statements.. I've had countless items shipped to me USPS. (I've also shipped with USPS as me being the sender)

Maybe if one used them to commit a crime, the postal inspector could come after you since you "accessed USPS to commit a crime" but I would consider this to be a stretch.
New user? Click HERE & HERE & HERE
unlisted
Moderator
 
Posts: 3151
Joined: Sat May 27, 2006 1:42 pm

Re: Southord E500XT

Postby mjw10210 » Tue Jun 30, 2009 12:19 pm

unlisted wrote:
wolfhunter wrote:Yes its illegal to send them through USPS...you may have not of had a problem but if you do...you will have the cops after you and your feet in crisco!

I would have to not agree with your statements.. I've had countless items shipped to me USPS. (I've also shipped with USPS as me being the sender)

Maybe if one used them to commit a crime, the postal inspector could come after you since you "accessed USPS to commit a crime" but I would consider this to be a stretch.


thats how i feel lockpicktools. com sends small orders through usps
mjw10210
 
Posts: 13
Joined: Fri May 22, 2009 4:49 am
Location: Traverse City, Mi


Return to Lockpicks - Automatic/Mechanical

Who is online

Users browsing this forum: Wizer and 2 guests