What did you pick today?

[.Ben]

just picked a master pro series 6121 for the first time! also a master no.5 a LSDA deadbolt and a cheap wafer lock on a "waterloo" toolbox acutlly i only picked the pro series today the otehres were yesterday or ill go pick them right now:D

[jasonthekey]

i picked an American Lock 1107 SPP and a 6 pin Best IC core in a Master Lock 6421 to the control line i got both in the mail today and had both picked in about 5 minutes i posted vids on the show your skills on camera thread

[l0ckp1cker]

Master Lock 1155D Dimple Padlock:

[james5345]

Been picking a master 140 padlock and a sterling padlock (both 4 pin) all day, got my average time down to about 30 secs ish...

[TheSkyer]

My ABUS 55/50 in less than 10 seconds with my homebrew tools. This lock has been my arch enemy since I started picking (I've always been able to open it but sometimes it took SO LONG). Now I can open it in less than 30 seconds each time I pick it up XD

[l0ckp1cker]

My ABUS 55/50 in less than 10 seconds with my homebrew tools. This lock has been my arch enemy since I started picking (I've always been able to open it but sometimes it took SO LONG). Now I can open it in less than 30 seconds each time I pick it up XD

Goed werk

I haven't tried the 55/50 myself yet, but if I'm not mistaken that's the model that Snowyboy is going to send me as a cutaway.
Can't really imagine it would be harder then the other ABUS locks I've picked already, but we'll see

[jamesphilhulk2]

im currently working on my evva 3ks its a

[james5345]

winkhaus 5 pin double ended cylinder link to my youtube channel http://www.youtube.com/user/SpartanLocks my picking is really coming on now, so i'm mega happy!

[v12v12]

I just picked a POS Master #3... been a while since I dusted off my skills, and accidentally broke my dang Peterson S-rake!!!!! DANG IT!

Working on a stubborn LSDA 40mm with no key Security pins in these things? (I pre-googled).

[v12v12]

I just picked a POS Master #3... been a while since I dusted off my skills, and accidentally broke my dang Peterson S-rake!!!!! DANG IT!

Working on a stubborn LSDA 40mm with no key Security pins in these things? (I pre-googled).

BINGO! Just popped the LSDA 40mm; A basic rake did it... I could feel the cylinder turn, but the pick would always get stuck b/c a center pin would lock and not budge, till I released the rest of the pins which started me all over again... Well time to do it over again! The monotony...

[awol70]

I just picked a POS Master #3... been a while since I dusted off my skills, and accidentally broke my dang Peterson S-rake!!!!! DANG IT!

Working on a stubborn LSDA 40mm with no key Security pins in these things? (I pre-googled).

stainless steel spools in mine..i have a vid on youtube...

[james5345]

ERA 5 pin cylinder 2 security pins and a really cheap padlock, both videos can be found on my youtube channel .http://www.youtube.com/user/SpartanLocks

ERA took me about 30 seconds and the padlock actually takes about one second... lol

[FarmerFreak]

Today I didn't pick too much. But yesterday was a fun/and a good day. Picking vehicles is my preferred method of entry, so of the ones I can remember.

The fun ones.
2008 Honda Civic, drivers door lock
2006 Porsche cayenne, drivers door lock

The average ones.
I don't remember which years these vehicle were.
Jeep wrangler, drivers door lock
Dodge neon, trunk
Ford F150, drivers door lock
Ford Explorer, drivers door lock
2 Chevy silverado's, drivers door lock

I also picked a couple of schlage locks. But overall nothing too difficult. Oh, and maybe a 1997 Nissan pathfinder, but I'm not sure if that was wednesday or tuesday. I wish everyday could at least be like that.

[james5345]

cheap dial padlock using pull and dial method, http://www.youtube.com/SpartanLocks you cant see the gates on the dials so its the only method that worked. Hopefully get another lock done tonight when i practice.

[jasonthekey]

Picked my Mul T Lock Classic with 4/5 pin stacks in both inner and outer pins this lock is giving me a harder time than expected