JIMBS BUMPKEY DEVICE-the best(i have tested)

[yono]

Jimbs B.key device, unveiled my missing fundamental on Bmpkeying (no matter what kind of Bmps method)
*These are his device principles that make it very effective.
1.when he "sets" his Bmpkey (to be ready for bumpkeying)
2.Aim the stopper/twister tube to stop the key from pulling out.
3.When he pull the spring, this "pulling" tends the Bottom pins to lean more on the right side of the "V" fence of the cut key.(Jimbs have you realize this important sequence when you first try your device? or this is your secret?
4. when he releases the streched spring, it kicks the bottom pins creating a roller coaster dive adding speed as it goes down and up the "V" key cut
kicking the T.pins further to its ceiling, and more time in dropping back, giving more posibility in turning the plug.
** It means in my bumpkeying, when the key is "set" i will further pull the key a little further feeling the B.pins is leaning on the right side of the "V"
cut of the key before applying the punch. Pls. see picture of my tool from Jimbs idea.
Congrats Jimbs, for me you opened a new door to bumpkeying. sorry you got suspended somewhere. they maybe studied your device potential. well, my bmpkey hammer is now expendable. THANKS JIMBS.
http://i302.photobucket.com/albums/nn11 ... 040871.jpg
http://i302.photobucket.com/albums/nn11 ... 040872.jpg
http://i302.photobucket.com/albums/nn11 ... 040874.jpg
http://i302.photobucket.com/albums/nn11 ... 040876.jpg

[jimb]

For some people this may seem a little confusing, but about 3 years ago I built a devise that worked exactly as this one does, but it was very primitive compared to this one. I issued a challenge at that time for someone to build a better one. One that a locksmith could use that would look more professional than beating a key with a screw driver handle. Even though mine was primitive someone started building mine from the plans I posted here and selling it on ebay. They even hot linked to my video to demonstrate how it worked. After some complaints to Ebay from some members here and myself the listing was removed. My complaint at the time was the use of my video. The suspension yono mentions is from YouTube because of this video.

You can read this thread here: http://www.lockpicking101.com/viewtopic.php?f=3&t=14010 The video will not work but I have reposted it on Photo Bucket and the method that it works is the same as Yono's. http://s62.photobucket.com/albums/h106/barrproductions/?action=view&current=HPIM0144-1.flv

Yono: You sir met the challenge. Most excellent! Now prepare yourself for the PM's from the people that want to buy one from you.

[MacGnG1]

i know ive seen some household device that works the same way....

this is very cool, if i get into bumping i would consider something like this

[yono]

To Jimb, i just finished the decent drawing based on your device principle and as i always observed the second product is always better than the first. i hope i met what you expect it would look like you wish to be. I owe you one buddy. see pic for its design.
http://i302.photobucket.com/albums/nn11 ... roject.jpg

[unlisted]

How much for one?

[yono]

To UNLISTED and all our Moderators if ever this will be mass produce (I hope)., you deserved to have one each free. thanks to all the hardworks in assisting us members, all the time. regards