Master lock number three key code.

[Goober]

Hi,
I'm new here and I was trying to figure out the bitting for a master lock number 3, The key code is 3207.

I checked eBay for precut keys but there isn't any, I've tried impressioning
But had no luck, Please help me.

[Squelchtone]

Sorry can't help you without more information. Is this your lock? Is it a key you were issued at work? We don't want to help someone in case they are trying to get into a lock that is not theirs, no offense intended and don't mean to be unhelpful, but this information can be misused in the wrong hands. your email address isn't helping either... you an ex con?

If you need to get into something you are locked out of, best bet is to call a locksmith or cut the lock off, it's just a $5 dollar padlock, so no big loss.

or you could make a shim out of a coke can, look up how to on youtube.

good luck and keep it legal.
Squelchtone

[femurat]

So you ask a question and then report the Admin reply?
Since you're new, I guess you just hit the wrong button...

Peace

[jeffmoss26]

take the lock into a locksmith, have them make a key. should cost around 10 bucks for the first key by code.

[cledry]

Another suggestion since you seemingly have the ability to cut keys by code or space and depth is to make a st of depth keys cut straight all the way across, one wide cut one depth per key. Pick the lock and place something like a drill bit in the shackle hole to prevent the cylinder from turning back. Now use your gauge keys to determine the cuts. You can often get all the cuts, but sometimes just a couple which you can easily sight read the remaining ones.