Fit a key to a MulTlock with a popsicle stick

[HeadHunterCEO]

[url]http://www.imagedump.com/index.cgi?pick=get&tp=150516[/url

kewl

check it out

[PickPick]

What exactly did you do? Did you make a copy of an existing key using the stick as a blank or did you impression the lock? Or something all together different?

[TOWCH]

Wasn't there a tutuorial posted awhile ago on foil impressioning these with popsicle sticks?

[Sabin37]

I'm going to try to copy a key with a popsicle stick. Thanks for the idea.

[HeadHunterCEO]

i pulled the plug out

cut a stick down so it would fit in the keyway

used a 1/16 drill bit for the inner dimple and a nail punch to make the largwe outer dimple

[WhiteHat]

that got me thinking - someone want to try that with a kaba?

perhaps moisten the stick or use wet balsa wood or something...

[HeadHunterCEO]

that got me thinking - someone want to try that with a kaba?

perhaps moisten the stick or use wet balsa wood or something...

thats how i matched up the wards in the back of the lock

however once it dried it shrank and no longer was a perfect fit.

next time (if that ever happens) i will put the stick in the microwave for a minute to cook off any moisture first