Victor Canon ball safe

[Sharplock0]

Mine only has 1 screw and it looks nothing like that.

I am rebuilding my victory cannonball. It was in my garage during a fire. Mine also only has 1 back cover screw, likely original to victor. I will remove the cover and post it. I did however misplace my dial but had the working combo. So I'm looking for an original dial and ring, as well as a handle which I could probably make my self.

https://ibb.co/S5S36rG
https://ibb.co/0X72bmS

Stay tuned. Dave

[Sharplock0]

Adding photo of lock cover removed.
Combination is:
4 turns CCW stopping on number.
3 turns CW stopping on number
2 turn CW stopping on number
turn CW to pull the lock in,allowing the crank handle work

https://ibb.co/Tt0WXdb
https://ibb.co/q0BfvqN

Thanks. Dave

One more thing. The little square holes are for changing the combo by removing the dial, inserting square key, then rotate to set combo and remove. Only do this with the door open. I have not tried it yet on this lock but I will pretty soon. Still trying to open the door.