Assistance with open Mosler safe

[iamforksu]

Hello -

I acquired this safe when I purchased my building and no one has any knowledge of the combination. I have done a bit of research but am struggling to determine what I need to do in order to set a new combination. Everything seems freely moving and functional so far. Including a link a pictures as everything currently sits. Any help appreciated!

https://photos.app.goo.gl/v8pDMUyzzzC7x5DD6

[MartinHewitt]

First: Don't close the door with the lock not tested at least 3 times and especially not disassembled!

Second: When you look at the wheel pack, you can see a notch on the top wheel at 44. This is your last number. The other wheels will have similar notches. To see them you will probably have to disassemble that stack. At the top is a C clip, which hast to be pushed or pulled out sideways. Then you can remove everything. Take care to note or keep the order of what you remove, so that you can put everything back in the same order. The next wheel you see will be the second number and the bottom wheel will be the first number.

Here is also a nice video: https://www.youtube.com/watch?v=x6L_jQJRQXQ

Btw. SNMA Group 3 means that the body is made from at least 1" steel and the door from at least 1.5" steel.

[iamforksu]

Thank you MartinHewitt. Your information (and the linked video) were exactly what I was looking for. New combo is set and tested. This ended up being much easier than I thought it would be. Thank you!

[MartinHewitt]

Great it did work out!