|
Forgot how to dial the combination on that old safe? Think you got the right numbers but the handle is stuck? What safe should you buy? Ask your safe questions here!
Forum rules
You are posting this in This Old Safe, a public area of the forum.
Safe manipulation discussion is allowed, but safe drilling or other destructive entry is only allowed in the Advanced - Safes and Safe Locks area.
If you are a guest of the forum and have a safe you need to open, but you do not have the combination, we cannot tell you how or where to drill it.
 by tomasfuk » 11 May 2015 10:49
First, use a smaller size of the pictures. It is inconvenient to handle with such page now.
Second, make sure you use a correct procedure how to dial the numbers. I don't think the mechanism may be so worn out.
As I understand, the safe is open - you can call an experiecend locksmith to review the lock mechanism. The problem may be one small spring broken...
P.S. Squelchtone was quicker...
Veni, vidi, relinquo. Vale!
-
tomasfuk
-
- Posts: 207
- Joined: 19 Apr 2015 2:35
by Squelchtone » 11 May 2015 10:50
Dont have a contractor dump it, sell it on craigslist for $500 dollars. Ask for $850 and take $500 cash.
You're in luck with the door already open, you can take off the cover on the inside of the door and learn how the lock works. You may very well have the correct combination, but a lot of these old safes have specific ways you need to dial in the numbers. (4 times to the left, 3 times to the right, etc)
We can try to help you figure out the dial turning sequence and get that safe in working order so you can then choose to keep it as a conversation piece or sell it fully working.
If you do decide to have a contractor scrap it, I'd like to request the dial and dial ring, and internal lock mechanism and tumblers if you could save them for me please.
Squelchtone
-
Squelchtone
- Site Admin
-
- Posts: 11307
- Joined: 11 May 2006 0:41
- Location: right behind you.
by GWiens2001 » 11 May 2015 13:51
Squelchtone wrote:If you do decide to have a contractor scrap it, I'd like to request the dial and dial ring, and internal lock mechanism and tumblers if you could save them for me please.
Squelchtone
This time it is Squelchtone that types faster.  Gordon Just when you finally think you have learned it all, that is when you learn that you don't know anything yet.
-
GWiens2001
- Site Admin
-
- Posts: 7550
- Joined: 3 Sep 2012 16:24
- Location: Arizona, United States
Return to This Old Safe
Who is online
Users browsing this forum: No registered users and 7 guests
|
