Mul-t-lock pins

[bigchoppers2003]

I am looking for somewhere I can buy a few driver pins for a Mul-t-lock classic, i think. I made a mistake when gutting mine after picking it to see what was in it and the inner fell into the hole for the ball bearing drill protection. Thank you all for your help in advance.

[Squelchtone]

If you know which pin you need here are 10 pack baggies

http://www.mrlock.com/index.php?route=p ... ption=true



and the Service Manual in case you need it: http://www.lsamichigan.org/Tech/MUL-T-L ... Manual.pdf

Squelchtone

[Squelchtone]

I have all the bottom/key pins and they work fine, it is I messed up the gutting/curiosity to see what is in there.

[Squelchtone]

I have all the bottom/key pins and they work fine, it is I messed up the gutting/curiosity to see what is in there.

so... I'm not sure what you're asking for.. you said you were looking for place to buy pins, but now you have all the pins..

are you looking for instructions on how to take the lock apart and put it back together? That would be in the Service Manual I linked to up above.

or what other info are you asking for?

Thanks
Squelchtone

[bigchoppers2003]

I have all the bottom/key pins and they work fine, it is I messed up the gutting/curiosity to see what is in there.

That is what I get for not double checking to make sure it is understandable. I meant I have all the bottom/key pins, I am missing one of the drivers now since I went to gut it and dropped a driver inner in a hole where the drill protection bearing is supposed to be. That pin now no longer works because in order to get it apart I had to break the inner driver pin.

[bigchoppers2003]

I have all the bottom/key pins and they work fine, it is I messed up the gutting/curiosity to see what is in there.

so... I'm not sure what you're asking for.. you said you were looking for place to buy pins, but now you have all the pins..

are you looking for instructions on how to take the lock apart and put it back together? That would be in the Service Manual I linked to up above.

or what other info are you asking for?

Thanks
Squelchtone

I fixed what it to show what I am looking for and if you click on the image that is in the post it will show what I broke and what I broke it with. In the image is the top/driver pin in pieces because when it broke it came apart.