|
Having read the FAQ's you are still unfulfilled and seek more enlightenment, so post your general lock picking questions here.
Forum rules
Do not post safe related questions in this sub forum! Post them in This Old Safe
The sub forum you are currently in is for asking Beginner Hobby Lock Picking questions only.
 by ThE_MasteR » 1 Nov 2005 20:34
I have a Masterlock No.532, for some of you who don't know, that was given to me by a close friend of mine, and he doesn't have the keys for the lock. I wanted to know if it was possible to go to a locksmith and make a key for this lock ? If it is possible, how would he proceed ?
Thanks
-
ThE_MasteR
-
- Posts: 1120
- Joined: 14 Apr 2005 11:11
- Location: Canada, Montreal
-
by n2oah » 1 Nov 2005 20:41
"Lockpicking is what robbing is all about!" says Jim King.
-
n2oah
-
- Posts: 3180
- Joined: 13 May 2005 22:03
- Location: Menomonie, WI, USA
-
by mcm757207 » 1 Nov 2005 20:55
A locksmith, assuming you only have one lock, would possibly recomend that you buy a new one as it may be cheaper than having a key fitted to it.
-
mcm757207
-
- Posts: 1468
- Joined: 12 Jan 2004 22:02
by ThE_MasteR » 1 Nov 2005 21:22
Yeah I read that, it's a very nice guide, except I don't have a removable cylinder, so I can't do that.
Reply to mcm151201:
I think this lock is well worth over 20$. I don't think a locksmith would charge that much just to get a key done for it, or am I mistaken ?
-
ThE_MasteR
-
- Posts: 1120
- Joined: 14 Apr 2005 11:11
- Location: Canada, Montreal
-
by digital_blue » 1 Nov 2005 21:27
I would agree that a locksmith would probably just say buy a new lock. I mean, I'm not sure what the cost would be to impression a key, then cut a proper one, but it's gotta be more than $20.
db
-
digital_blue
- Admin Emeritus
-
- Posts: 9974
- Joined: 6 Jan 2005 15:16
- Location: Manitoba
-
by zeke79 » 1 Nov 2005 21:27
Depends on where you go on how much it will cost. The locksmith will likely impression a key for you while you wait if he or she is not busy.
For the best book out there on high security locks and their operation, take a look at amazon.com for High-Security Mechanical Locks An Encyclopedic Reference. Written by our very own site member Greyman! A true 5 Star read!!
-
zeke79
- Admin Emeritus
-
- Posts: 5701
- Joined: 1 Sep 2003 14:11
- Location: USA
-
by digital_blue » 1 Nov 2005 21:28
Hey, just a thought... why not use this as an opportunity to learn to impression a key?  Get a couple blanks from a locksmith and have a go at it.
db
-
digital_blue
- Admin Emeritus
-
- Posts: 9974
- Joined: 6 Jan 2005 15:16
- Location: Manitoba
-
by ThE_MasteR » 1 Nov 2005 21:37
digital_blue wrote:Hey, just a thought... why not use this as an opportunity to learn to impression a key? Get a couple blanks from a locksmith and have a go at it. db
I matters well try that, for i will be getting more locks with no keys in the future. Thanks for the input DB, i'll give it a try
-
ThE_MasteR
-
- Posts: 1120
- Joined: 14 Apr 2005 11:11
- Location: Canada, Montreal
-
by mcm757207 » 1 Nov 2005 21:51
According to masterlock, that lock costs $10-15 depending on shackle size. If he were to bring that lock into the shop I work at, it would run him about $15 to make a key for it. A new lock comes with two keys too.
-
mcm757207
-
- Posts: 1468
- Joined: 12 Jan 2004 22:02
by specialist » 1 Nov 2005 22:04
Being a pin tumbler, these locks can be tricky to impression if you don't have a bit of practice. Our shop charge is roughly $12.50, and about ten minutes.
As it turns out, there is only 1 way to do things...right, and fast.
-
specialist
-
- Posts: 70
- Joined: 11 Jan 2005 16:28
- Location: FL, USA
Return to Got Questions? - Ask Beginner Hobby Lockpicking Questions Here
Who is online
Users browsing this forum: No registered users and 17 guests
|
