cb picks

[smile]

can someone tell me if the cb E serice pocket curtain wheel pick does the pro fit, i currantly pick these locks with a cb 7 gauge but i hear the e serice goes under the low lift levers a little easier .and this must make decoding easier, thanks

[79commando]

It's not just getting under the low levers; it's also lifting the high lift levers enough to get in the gate. You will find that the e series wire due to the angle will struggle to get some levers.

[smile]

what locks are the E serice for i suspect its chubb but i could be wrong

[SteveW]

The E wire is designed to open the Chubb E series locks.

[Lukekjackson]

Smile,

I suspect you're talking about using the e series turner and not the wire, if so I’d be interested to here the answer to this.

I have a profit with low lift levers and it is difficult to get under them, I was wondering myself if it would be possible to lift them a bit using an adapted turner, without over lifting.

[nhughz]

You should be able to pick the profit with no problems using the CB Pick, it just takes a bit of practise to navigate under the low levers that's all.

[quicklocks]

the lowest lever in the profit and invinceable hardley needs touching to get it in the gate, so i suspect the e seires stem if it fits a profit would over lift this lever.