Having read the FAQ's you are still unfulfilled and seek more enlightenment, so post your general lock picking questions here.
Forum rules
Do not post safe related questions in this sub forum! Post them in This Old Safe
The sub forum you are currently in is for asking Beginner Hobby Lock Picking questions only.
by Catch » 12 Nov 2006 16:54
As someone who has just started picking and has only managed to overcome the one pin tumbler lock I own, I would like to know where to go from here to build on this. What locks would others suggest to move onto now? I want to build my own practice board with locks of all kinds.
Suggestions of lock types/models would be fantastic.
-
Catch
-
- Posts: 10
- Joined: 11 Nov 2006 20:59
- Location: Leicester, UK
by UWSDWF » 12 Nov 2006 17:03
First of all fill out your location and such so we know where you are and can give locationally specific locks (they do differ around the world)
next take a look at db's guide ( viewtopic.php?t=10677)
that is a great way to start and learn...
Cheers
 DISCLAIMER:repeating anything written in the above post may result in dismemberment,arrest,drug and/or alcohol use,scars,injury,death, and midget obsession.
-
UWSDWF
- Supporter

-
- Posts: 4786
- Joined: 27 May 2006 13:01
- Location: Toronto, ON. Canada
by Catch » 12 Nov 2006 17:10
Location done, I have read that guide and completed the exercise. I just wanted an idea of which locks to move onto next really.
-
Catch
-
- Posts: 10
- Joined: 11 Nov 2006 20:59
- Location: Leicester, UK
by UWSDWF » 12 Nov 2006 17:16
what did you start with (brand/model)?
 DISCLAIMER:repeating anything written in the above post may result in dismemberment,arrest,drug and/or alcohol use,scars,injury,death, and midget obsession.
-
UWSDWF
- Supporter

-
- Posts: 4786
- Joined: 27 May 2006 13:01
- Location: Toronto, ON. Canada
by Catch » 12 Nov 2006 22:08
I don't know the brand or model, it's just a basic front door lock and has no markings on it.
Poor picture, but one of these...

-
Catch
-
- Posts: 10
- Joined: 11 Nov 2006 20:59
- Location: Leicester, UK
by Romstar » 12 Nov 2006 22:54
Looks like a copy of a Yale rim cylinder.
A lot of people say pad locks, and I agree that you should always have some experience with them.
However, I think that you would be better served by going to a good building supply store and buying a combo pack with a key in knob and dead bolt.
These two configurations are the most common things you are going to see, and they both have their quirks.
Try Yale, Barricade, Schlage, Titan or even Kwikset or Weiser.
As time goes on, if money permits just buy anything that catches your interest. That way you will have a wide body of experience.
Romstar
-
Romstar
-
- Posts: 2823
- Joined: 18 Apr 2004 3:13
- Location: Nova Scotia, Canada
by Catch » 12 Nov 2006 23:27
Thankyou again Romstar, this is exactly the information I was looking for 
-
Catch
-
- Posts: 10
- Joined: 11 Nov 2006 20:59
- Location: Leicester, UK
by Romstar » 13 Nov 2006 0:00
Catch wrote:Thankyou again Romstar, this is exactly the information I was looking for 
I see that you are in the U.K. This means that sooner or later, you are going to want to start looking at lever locks.
Take the time to look for older locks you can disassemble so you can learn about how they work. If you find working locks that are simply being replaced, save them for picking practice.
Pin tumbler exclusive is fine for North America, but you are living in the land of the lever. Take the time to learn that as well. There are some excellent chaps here who will be happy to tell you which locks you should start with.
Good luck,
Romstar
-
Romstar
-
- Posts: 2823
- Joined: 18 Apr 2004 3:13
- Location: Nova Scotia, Canada
by Catch » 13 Nov 2006 22:24
Ah lever locks, I'll definitely get some of those. It would be great to know which to go for (for any Brits out there).
You've been a great help Romstar, again I give you thanks! 
-
Catch
-
- Posts: 10
- Joined: 11 Nov 2006 20:59
- Location: Leicester, UK
Return to Got Questions? - Ask Beginner Hobby Lockpicking Questions Here
Who is online
Users browsing this forum: No registered users and 7 guests
|