Peterson U-Bend-It

[logosys]

Ok, I FINALLY got a Dremel tool, and I'm going to try to make some tension wrenches, but I have NO idea how to use this tool. Any tips?

[Wesson357]

The ubendit tool has slots of various lengths to make angles on your tension wrenches. Basically you fit the blanks in and bend them down over the edge to create the tools.

[Romstar]

If you mean that you don't know how to use the Dremel, you should take the time to read the book that came with it.

Just make sure you have a good grip on the tool.

Romstar

[logosys]

If you mean that you don't know how to use the Dremel, you should take the time to read the book that came with it.

Just make sure you have a good grip on the tool.

Romstar

I know how to use a Dremel, I don't know what all the different bends in the Peterson Tool are for. Are they used for a specific bending of a wrench? I'm so confused...

[Romstar]

You know what tension tools look like.

Use the Peterson tool, a pair of pliers, and experiment.

You'll be fine.

Romstar