HEY - can you guys tlel me what type of lock this

by **Aussie_Chap** » 20 Dec 2005 1:25

I dont know if this is the appropriate type of forum to post this kind of thing in ... But since it is a lock I figure you lock pickers should know something about that kinda stuff :-)

Can you please help me identify this type of lock

Thanks heaps fellas... any input would be much appreciated :-)

by **Omikron** » 20 Dec 2005 1:37

Yummy!

What you've got there, is a BiLock cylinder, most likely a "New Generation"!

Now, there ARE both USA and AUS factories...but judging by your name, I'll just go ahead and say that you've got yourself an AUS keyway.

Where did you get it?

by **Omikron** » 20 Dec 2005 1:39

USA Site: http://www.bilock.com/

AUS Site: http://www.bilock.net/

Just out of curiosity, why do you ask?

by **digital_blue** » 20 Dec 2005 9:56

I'm gonna unlock this, 'cause it's really not discussing bypass at this point. However, I will mention that discussion of bypass of high security locks is reserved for the advanced forum. No harm in just mentioning the lock tho.

db

by **greyman** » 20 Dec 2005 11:53

I concur. It's a New Generation BiLock. You can tell from the curved edges of the keyway (at the top of the photo). The main difference with standard BiLock is that there is a blocking mechanism activated by a pivoting member on the key. This makes it very hard to duplicate the key since you can't really mimic the pivoting part of the blade. The rest of the lock has 2 rows of 6 pins that have to line up with sidebars, one on each side of the keyway. Don't bother trying to pick it - it's already very difficult even without the blocking mechanism.

Check out this link - though I couldn't find the New Generation stuff
http://www.bilock.internetrix.net/index.pl?page=52

by **Omikron** » 20 Dec 2005 15:30

greyman wrote:Check out this link - though I couldn't find the New Generation stuff
http://www.bilock.internetrix.net/index.pl?page=52

They're all either New Generation, or D9. As far as I can tell, at least in the USA, they no longer produce the First Generation units.

by **Chrispy** » 21 Dec 2005 2:57

'Spose I should take this thread off the thread collection then, eh? :wink:

by **dxlocks** » 21 Dec 2005 3:14

It's a NG. The lock pictured is no different from an OG, though the face plate is not fixed and is more prone to breaking and the key is different.

by **vector40** » 21 Dec 2005 3:22

digital_blue wrote:I'm gonna unlock this, 'cause it's really not discussing bypass at this point. However, I will mention that discussion of bypass of high security locks is reserved for the advanced forum. No harm in just mentioning the lock tho.

Addendum: If you actually KNOW a bypass for these, please DO let us know in advanced

I would be just fascinated.

by **dxlocks** » 21 Dec 2005 3:26

vector40 wrote:
digital_blue wrote:I'm gonna unlock this, 'cause it's really not discussing bypass at this point. However, I will mention that discussion of bypass of high security locks is reserved for the advanced forum. No harm in just mentioning the lock tho.

Addendum: If you actually KNOW a bypass for these, please DO let us know in advanced I would be just fascinated.

Falle has an foil impressioning system for these, i will let you figure the rest out from there.

by **skold** » 21 Dec 2005 3:43

That lock almost looks like a switch lock.

by **Omikron** » 21 Dec 2005 3:51

skold wrote:That lock almost looks like a switch lock.

I think it's quite obvious what that lock is for...

A missle silo! He's trying to launch nukes! :lol:

by **skold** » 21 Dec 2005 3:52

by **Aussie_Chap** » 25 Dec 2005 9:51

I swear last time I was here this thread was locked

by **Aussie_Chap** » 25 Dec 2005 9:55

Are these locks available for purchase by individuals?