Masterlock with a padlock shim

by **Djeepy46234** » 12 Jun 2006 21:48

Hi

I found a Masterlock in the oldstuff of my mom and i tried to do the thing with the padlock shim.

The only problem is that the hole on the lock is too small. Well, there's no space at all to enter the shim...

Someone know why and how i can do ?

by **What** » 12 Jun 2006 23:25

what kind of masterlock?

by **Djeepy46234** » 13 Jun 2006 17:24

This one :

by **What** » 13 Jun 2006 19:00

how thick is the shim?

and, if you press the shackle to the side w/o the locking mechanism is there a bigger gap?

if so, try putting the shim in then.

by **Djeepy46234** » 13 Jun 2006 23:08

Nope, I can't do a bigger gap when I move the thing... My shim is like the one in the tutorial, I did it with a Nestea can....

by **What** » 13 Jun 2006 23:13

well, congradulations, you actually have a masterlock with good tolerances.

:lol:

by **digital_blue** » 13 Jun 2006 23:14

What wrote:well, congradulations, you actually have a masterlock with good tolerances.

Or a Nestea can with really bad tolerances.

by **Jason13** » 14 Jun 2006 0:07

try putting it in the other way like your trying to shim on very side but u can try put it in from the inside of th shackle thats where the most space is.

by **Djeepy46234** » 14 Jun 2006 18:14

Still not enough place

.. That's strange, I'ts the first one i see like this.

Masterlock with a padlock shim

Masterlock with a padlock shim

Who is online