wafer locks

[stargate]

I have a computer desk at home which has a double side key. I am keen to try picking. I dont have any wafer type pick but I plan to buy a set from SO. Do I need a wrench of some kind to pick these drawer locks.

[mako]

Yes you need a wrench to pick this lock. You always need tension when opening a lock.

[mako]

What picks are you using now?

[Shrub]

Dont practise picking on locks in use,

You will need a double pronged wrench for a double sided wafer,

[parapilot]

If its on a computer desk chances are its not a double sided wafer lock only a single sided, both sides of the key are cut so you can use it either way round. A ball pick available in most beginner sets will be fine and cause less damage to the wafers than half diamonds etc.

As Shrub said if you use the lock dont pick it. If its your first lock i can almost guarantee you will damage the wafers after picking it a few times.

Cheers
Jamie.

[stargate]

Thanks for the tips guys.

I generally used a short pick as I find this the most effective with doors , padlocks and "S" series on desk drawers. I not really a fan of the other picks. These wafer type lock I havent had to pick one of these for work purposes but I might have a go, as suggested, at using the ball pick when the opportunity arises. I agree, many computer desks are single sided but I have seen some that are double sided. My computer desk drawer in not attached to the desk but comes with small wheels underneath.

I'll avoid picking my computer drawer but I will keep in the ball pick in mind.

[Raccoon]

FYI, desk and filing cabinet locks can usually be opened via small pocket knife or paperclip. They are not security worth noting-- as long as you can move the wafers while applying a turning force, the lock will open with next-to-no effort.

[stargate]

Thanks Raccoon. I will certain make a note of it.