Jason13 wrote:got a link u kinda get a piece of paper like rectangle anf do a M on it then cut it out and trace it on a sheet of metle of type of beer can
Be carefully on the beer or coke cans very share edges
not as hard to lean as picking but you need to know the locking method of of the lock you want to shim, will not work on all locks and some you will need to shim both sides.
auto
my padlock as this rubber ring on 1 part and im guesing this 1 has 1. i know that thres a gap in the botom of te shackle and theres like a we metle that comes out and sticks in that. so you stick that in and your pushing the pin in but i need a guide on how to.
this may be a generalisation - but if you push the shackle down and it pops back up like a spring action then likely you will be able to shim it.
Locks that are shimmable can be picked fine, tricircle being an anomaly, unless you use the heavy tension powerfull raking... you put the half-diamond into the back of the lock by the last pick and pull it out hard - this seems to work like a pickgun or bumpkey, but it is not good for the lock and especialy with the soft pins of the tricircle - not to be done too often.
remember no flaming
