Yeah !! Its a special pic for a special lock !!
There is the translation with google app
Author: taskforce
Hep!. For this article, I gathered, for you dear readers and
Lockpicking readers fanatics, all the elements needed to be
Able to unlock the locks Vanlock. They serve several
Applications of life-current asking security, for example; padlock
High Security (ex1, ex2), vending machine, cabinets and other authorities and Locks for lock package keys in prison. Locks, which in fact, are
"Radial pin (Radial pin tumbler). Se making simplistic in three stages,
Now made up for the tour.
Up there, in the left image, we have a copy of a lock
Vanlock locked to his condition and the right image is the key
Specially designed to disengage the lock by the action of
Pressing the key to the lock and a rotation toward 90dgr
Right. When unlocked, each of the 7 pins is pushing its
Rival, which is located inside the key, which has a length
Different. Once allignées, the pins allow the central devious
Be rotated in a clockwise direction. Let's forge a simili
Key.
Ingredients
1. 2 big paper clip
2. A erases (eraser)
3. A clip Cup
4. A sheet of tracing paper (thin paper)
5. A pencil or charcoal graffite
First step - Taking the borrows
This step is simplistic and will allow you to get the measures
Accurate, on the other hand it asks you to leave on the ground to take
Borrow at one layer, ie take borrows from the surface
Circular of the latch. It is simply a matter of applying the layer on paper
The surface of the lock and gently shake a pencil or charcoal on the
Paper to reveal the circulars emanating from the pins and
Of the latch itself. This should give the following below.
Step Two - The transfer
The transfer of the borrowing is to be seen at the location
Pins on an eraser (one erases) to be able
Placing the rods to be used for the main part of our key
`` Magic. This step is not strictly to perforate paper, where
Marks of the pins have emerged at the layer on the surface of the
Gum to make the marking (transfer) of the statement that was made earlier.
Last step - Assembling
At this point, we have obtained, through a duplicate of the
Surface with a lock followed by the transfer of collected borrows, the draft
What will be our "magic eraser. For this step made
Reveal your trombones and straighten them so that no
Irregularity on the righteousness of equipment. Once the reorganization is complete,
Cut ends Sept. 5 centimeters. Now, it only remains to push
THE BEST POSSIBLE VERTICALLY portions of the trombones
Locations previously registered during the transfer layer. And now, a
Wand, we obtain a mysterious object that can be admired
Below.
In its finality, an eraser therefore serve as key
Vanlock. Like the tools to pick locks with tubular, this
Tool works almost the same way. Simply push each
Pin, one by one, to play clockwise or not to take advantage of leste
Mechanical components of the lock and then be able to
Unlock the device. According to the observations, after some time,
Gum clears the cracks but still firm .. So I recommend
The use of other equipment; as a block of plastic (PVC or otherwise),
Cork, allowing for a degree of firmness on all pins.
While we know that people who have not read this article and
See the object created, did not know. So I leave you to produce
New magic tricks while sailing to new adventures
Fantastic ...
Oh! A little last-minute addition, there are also opportunities to replicate
The original key from the lock and the principle of bumping is viable for this
Latch (then I see them hit eraser with a hammer Tomahawk
) ...
