Information about locks themselves. Questions, tips and lock diagram information should be posted here.
by MacGnG1 » 15 Aug 2011 10:41
Well... Coulda been worse if the key was broken in the off position!
Nibbler: The poop-eradication is but one aspect of your importance.
-
MacGnG1
- Supporter

-
- Posts: 1360
- Joined: 9 Apr 2008 22:14
- Location: Know Where, MD, USA
-
by MrScruff » 16 Aug 2011 13:50
Maybe someone "accidentally" broke their key in the lock. 
"We all sit around in a circle and suppose, while the secret sits in the center and knows." --Robert Frost
-
MrScruff
-
- Posts: 165
- Joined: 15 Jul 2011 12:50
- Location: Manitoba, Canada
by MacGyver101 » 9 Sep 2011 10:56
I passed by this shop in Hong Kong earlier this evening: I think this has to be the largest set of padlocks holding a single door shut that I've ever seen. (And it didn't appear to be configured to allow any one of them to open the door individually: it looks like you need to take all four of them off!)
-

MacGyver101
- Moderator Emeritus
-
- Posts: 1560
- Joined: 21 Jun 2006 14:40
- Location: Toronto, Canada
by Evan » 9 Sep 2011 12:13
MacGyver101 wrote:I passed by this shop in Hong Kong earlier this evening: I think this has to be the largest set of padlocks holding a single door shut that I've ever seen. (And it didn't appear to be configured to allow any one of them to open the door individually: it looks like you need to take all four of them off!)
Looks like its a shop run by five guys... Need all five to open and close... They can all work together as a group but they don't trust each other enough to only allow one lock on the door so everyone can share copies of the same key... ~~ Evan
-
Evan
-
- Posts: 1489
- Joined: 5 Apr 2010 17:09
- Location: Rhode Island
by femurat » 10 Sep 2011 3:17
Maybe these padlocks are just sitting there. they may be used on different doors or windows when needed. just a thought 
-

femurat
- Site Admin
-
- Posts: 3745
- Joined: 22 Sep 2008 9:06
- Location: Italy
by MacGyver101 » 10 Sep 2011 4:01
femurat wrote:Maybe these padlocks are just sitting there. they may be used on different doors or windows when needed
It's probably not so clear from the photo -- but each padlock is attached to a set of plates that are sandwiched on either side of the glass door, preventing it from opening. I'm giving 50:50 odds that it's either a really paranoid shop-keeper, or (given the combination of keyways) a member of this site. 
-

MacGyver101
- Moderator Emeritus
-
- Posts: 1560
- Joined: 21 Jun 2006 14:40
- Location: Toronto, Canada
by Anavaree » 13 Sep 2011 10:09
Just thought I would post my own little discovery. Not so much a road trip as I found these locks in my companies electrical sub-station, but I don't usually go in there. These panels are brand new and the old ones didn't have locks.   I can't mess with the keys since it will likely shut down part of my building. Just thought they were interesting. ~Jesse
There is no such thing as impossible, just different degrees of awesome.
-
Anavaree
-
- Posts: 152
- Joined: 26 Jul 2011 8:53
- Location: Kentucky, USA
by mcsteve » 13 Sep 2011 10:45
Nice find. That's a Kirk-key interlock setup. The top row of three locks side by side likely do nothing by themselves, they just hold the keys. Typically those setups would be used to keep two sources of power from being connected at the same time. For instance, you might have to turn off a breaker to remove a key from it, and then place that key in one of the grouped locks. Turning the key will allow you to remove a different key from the group, which would then be used to turn on a different circuit breaker. Sometimes they can also be set up to ensure that an electrical or mechanical room only has power when the door is closed and locked. There are many uses, and unlike various types of electronic interlock, they're pretty failsafe and easy to use with anything that can have a key lock installed.
-
mcsteve
-
- Posts: 46
- Joined: 21 Mar 2011 22:24
- Location: Minneapolis, MN
by Anavaree » 13 Sep 2011 11:18
That's essentially what was explained to me. We have 6 switches in that substation. I guesse we can tie them together any which way we want.
There is no such thing as impossible, just different degrees of awesome.
-
Anavaree
-
- Posts: 152
- Joined: 26 Jul 2011 8:53
- Location: Kentucky, USA
by Anavaree » 9 Oct 2011 20:24
Found another odd lock, well nothing special, at work. on the control pedestals for some of our machines.  All brass, was very easy to pick, riffle pick and 5 seconds and done. 4 pins. ~Jesse
There is no such thing as impossible, just different degrees of awesome.
-
Anavaree
-
- Posts: 152
- Joined: 26 Jul 2011 8:53
- Location: Kentucky, USA
by Dpruente » 20 Oct 2011 4:07
MacGyver, I don't think that would ever go down in a u.s. airport, and if it did, I'd be in stern protest of the molestation I get because of stuff like that lol
-
Dpruente
-
- Posts: 51
- Joined: 19 Feb 2011 1:41
- Location: Waterford, MI
by Evan » 20 Oct 2011 14:15
mcsteve wrote:Nice find. That's a Kirk-key interlock setup. The top row of three locks side by side likely do nothing by themselves, they just hold the keys. Typically those setups would be used to keep two sources of power from being connected at the same time. For instance, you might have to turn off a breaker to remove a key from it, and then place that key in one of the grouped locks. Turning the key will allow you to remove a different key from the group, which would then be used to turn on a different circuit breaker. Sometimes they can also be set up to ensure that an electrical or mechanical room only has power when the door is closed and locked. There are many uses, and unlike various types of electronic interlock, they're pretty failsafe and easy to use with anything that can have a key lock installed.
For anyone who is interested in more information about the Kirk interlocks here are some useful links: << External Link to Kirk SD series interlock device webpage >><< External Link to Kirk interlocks scheme book .PDF file kirkschemebook_09.pdf >>The above links will show you the types of locking devices used in the interlock schemes as well as schematic diagrams of how and why interlocks would be useful to control electrical energy in an industrial environment for worker safety to service/repair the machines or prevent two sources of energy being connected to the same load at the same time... ~~ Evan
-
Evan
-
- Posts: 1489
- Joined: 5 Apr 2010 17:09
- Location: Rhode Island
by Wizer » 18 Nov 2011 5:56
There is one or two of these on every block of flats. They are key safes for emergencies. I bet that atleast firemen and paramedics have keys for these. There are Protec, two different High Profiles, and a Sento. These are found in Vantaa, Finland. 
-

Wizer
-
- Posts: 687
- Joined: 13 Jun 2009 3:54
- Location: Finland
by femurat » 18 Nov 2011 6:15
Very interesting Wizer, thanks for sharing Here in Italy we prefer to put the spare key under the doormat or in the postbox  Seriously, usually a friendly neighbour or the caretaker has spare/emergency apartment keys. Cheers 
-

femurat
- Site Admin
-
- Posts: 3745
- Joined: 22 Sep 2008 9:06
- Location: Italy
Return to Locks
Who is online
Users browsing this forum: No registered users and 8 guests
|