EVVA padlock

[lbern]

Hi all

I still consider myself a beginner at lock picking so please don't be too hard on me
Today I tried to pick the following EVVA padlock:



I was able to get it to the following position:


The shackle is still locked and I can not rotate the core any further.
This is first time for me that I experienced something like this.
It does not look like a false set to me, thus I thought it could be a side bar or pin.
However I was not able to pick it completely and unfortunately I have no key to this lock.

I hope someone can give me an advice/explanation.

[GWiens2001]

Blowing up your picture, can see at the bottom of your keyway (upper right of the plug in the picture) that there is what looks like a driver pin pushing in to the bottom of the keyway. Probably the sidebar driver, or some such thing.

Push that up, and you should be able to keep turning the plug.

Gordon

[mhole]

viewtopic.php?f=9&t=49545

[mhole]

Oops, double post!

[lbern]

Thank you for your replies. I'll try your suggestions.
A trap pin? Ok that sound interesting.