RE:What type of picks should I use for these locks?

[ruski]

Hi guys again, I got my pick set from lockpicks.com. What techniques should i use on these locks? Raking?
Thanks
Bob Long

[WhiteHat]

didn't you already post the same question?
viewtopic.php?p=41458

all standard pin tumblers can be picked using standard tools.

key things:

1) read the MIT guide
2) Don't pick locks that are attached to your door lest you break them
3) practice
4) repeat step 3

[ruski]

ya but the pictures dont work anymore. Admin please delete my old post : viewtopic.php?p=41458 thanks

[bushd]

If those top two, the SFIC looking knobs, aren't yours then I would suggest not picking them. We have those at work and they are BEST. You can bet your paycheck, if you get one, that messing that lock up will be costing you some money. I wouldn't pick them if they're in operation at all until you get a good amount of experience with them off of a door because that restriction will make a difference.

If this is your first attempts at picking locks, or even moderately after then I wouldn't suggest starting out on the SFIC locks especially if they are the BEST ones. I popped one at work open because I had to; Our lovely patients locked the door on the way out and we don't have a key to the door.

[^kimba^]

Have to admit I find it MUCH easily to pick locks on the doors than off.. but all valid advise. Screw up a lock on a door that you need to get in and out of, and you could be in for a rough and expencive time!

[logosys]

Yeah, the SFIC on the latch probably is NOT a good idea to pick. Keep in mind that people don't like the idea of other people messing with their locks...

[ruski]

What happens when you remove the inner core (interchangeable core), from the door lever?

[CaptHook]

Most are wired to a silent alarm, some have vials of tear gas behind them that shatter as the core is removed.
When the core comes out, you are looking at a 2 pronged cam inside that works the latch.
Chuck

[Mad Mick]

Also, don't forget that removing the core with the door closed activates the automatic deadlocking bolt. The only way in then, is to use a chainsaw on the door.