After a few years it's time to revive this old thread of mine. I thought I posted pictures of the finished safe but looks like I didn't. My bad.
I had the safe on the side of my workbench for a few years, and always wanted to make a stand for it. The safe is very heavy for its size, so it needs an adequate support. On wheels. I made a dozen projects and finally chose one that could fit three safes. I don't have many tools, so I had to come up with a project that didn't require special woodworking tools but solid and with strong joints.
I bought and cut some wood
Glued together the two parts of the horizontal supports
Glued the horizontal supports to the legs
Sanded the finished assembly
Screwed the three shelves
Mounted the wheels
And finally put it in place
Here is a closeup of the finished stand. On the bottom shelf there's a nice Juwel safe. The middle shelf is temporary occupied by my toolbox. One day or another I may get another small safe...
And here is the main piece of my collection in all its glory
Cheers
