Wondering which locksmith course to take? Looking for locksmith license info for your locale? This is the forum for you.
by IndigoChild » 25 Mar 2014 11:08
My license experience was actually fairly pleasant. In fact I had it within 4 months of moving to Texas. Though my concern now is whether or not I can renew it. But I would suggest going to a local locksmith and explaining your situation that you are trying to get licensed but due to state regulations for the time being it has been rendered impossible for you. You might be able to get hired on temporarily to get you a license. Just an idea, I don't know how many locksmiths would be very receptive to a new guy coming in wanting his license. I know the shop I worked for was extremely competitive and have ran out several under qualified locksmiths in the area.
"How does it work?" "Only one way to find out. Open it up!"
-
IndigoChild
-
- Posts: 236
- Joined: 1 Feb 2013 13:50
by Divinorum » 25 Mar 2014 12:42
IndigoChild wrote:My license experience was actually fairly pleasant. In fact I had it within 4 months of moving to Texas. Though my concern now is whether or not I can renew it. But I would suggest going to a local locksmith and explaining your situation that you are trying to get licensed but due to state regulations for the time being it has been rendered impossible for you. You might be able to get hired on temporarily to get you a license. Just an idea, I don't know how many locksmiths would be very receptive to a new guy coming in wanting his license. I know the shop I worked for was extremely competitive and have ran out several under qualified locksmiths in the area.
That was a thought I had. Worth a try but, I don't really know how helpful they would be to help someone who would end up somewhat competing with them in the end. At least I think they would see it that way. I'm not exactly set on locksmith as a career but, I have learned a good amount (can do re keys, key cutting, lockouts, some master keying etc) and if I were to do some part time work on the side I was looking to do it legally with a license. Granted I still have a ton to learn and I wouldn't apply for the license for some time to come I just wanted to get the info so when I was ready I would know what to do.

-

Divinorum
- Supporter

-
- Posts: 470
- Joined: 6 Dec 2013 16:18
- Location: New York
-
by billdeserthills » 28 Mar 2014 11:05
Wow what a pita, In Arizona we don't have a locksmith license requirement, but some locksmiths will get a contractors license if they do jobs for over like $850. I never had that problem tho and since I don't do any electrical work I can't see what is in it for me to pay my county a pile of money in order to get a pretty piece of paper to hang on my wall. In fact locksmiths in this state generally do advertise as "Licensed, Bonded & Insured" but my license is a resale license the state & city have provided for a yearly fee. I am bonded through the National Safeman's Organization and I have a 2million dollar liability policy. If I were you I would wait for them to come to me with their license scheme, the whole thing sounds like a scam to me.
-
billdeserthills
-
- Posts: 3827
- Joined: 19 Mar 2014 21:11
- Location: Arizona
by Paleo123 » 28 Mar 2014 12:06
Classic inept government employees  But seriously that sounds like a bunch of bs I would be fairly vexed
AC
-
Paleo123
-
- Posts: 125
- Joined: 14 Mar 2014 13:36
- Location: Charlottetown
by Evan » 29 Mar 2014 8:18
billdeserthills wrote:Wow what a pita, In Arizona we don't have a locksmith license requirement, but some locksmiths will get a contractors license if they do jobs for over like $850. I never had that problem tho and since I don't do any electrical work I can't see what is in it for me to pay my county a pile of money in order to get a pretty piece of paper to hang on my wall. In fact locksmiths in this state generally do advertise as "Licensed, Bonded & Insured" but my license is a resale license the state & city have provided for a yearly fee. I am bonded through the National Safeman's Organization and I have a 2million dollar liability policy. If I were you I would wait for them to come to me with their license scheme, the whole thing sounds like a scam to me.
They go for the contractor's license because it allows them to place a tradesman's lien against the real estate in the case of an unpaid bill a lot more easily than it would otherwise be if you were totally unlicensed... ~~ Evan
-
Evan
-
- Posts: 1489
- Joined: 5 Apr 2010 17:09
- Location: Rhode Island
by Evan » 29 Mar 2014 8:25
Divinorum wrote: So I start out with a Google search and find out the county consumer affairs division has a Licensing Bureau. I'm thinking perfect that must be the place. WRONG, they only handle Home Improvement and Taxi licenses. Could locksmith fall under home improvement I ask, nope it does not. So I ask who do I need to speak with. They direct me to the county clerks office. So I call the county clerk and guess what? They say they don't do licensing and tell me to call consumer affairs. LOL. I explain that consumer affairs routed me to them. They say well we don't do licensing, try calling your town. I explain it's a county law and has nothing to do with the town and the guy insists yes it does. So I call the town and........they have no idea about a locksmith license, go figure because it's not a town law it's a county law. After all that I ended up calling the county executives office to politely explain the unacceptable runaround experience I am having and how absurdly difficult it is to get a straight answer. The lady apologizes and puts me on hold for 15 min to come back and say no one knows who to contact and can they call me back.
Since locksmithing is closely related to public safety and the prevention of crime, in many areas where it is regulated by individual counties and NOT handled by a county-wide licensing bureau, I would contact the County Sheriff's office... As far as your "runaround" experience ? From your viewpoint you did nothing wrong, however from other viewpoints you asked an unanswerable question of agencies who aren't responsible for that specific function... You wouldn't go to the DMV for instance and ask environmental questions about forestry practices in state parks... ~~ Evan
-
Evan
-
- Posts: 1489
- Joined: 5 Apr 2010 17:09
- Location: Rhode Island
by billdeserthills » 29 Mar 2014 10:57
So did they ever call you back? Really tho Divinorum, the city of NY is just gonna take whatever money you give them and give it to some welfare mom with 9 kids who prolly drives a cadillac, so why bother?
-
billdeserthills
-
- Posts: 3827
- Joined: 19 Mar 2014 21:11
- Location: Arizona
by Divinorum » 29 Mar 2014 14:33
billdeserthills wrote: So did they ever call you back? Really tho Divinorum, the city of NY is just gonna take whatever money you give them and give it to some welfare mom with 9 kids who prolly drives a cadillac, so why bother?
I never said it was the city  and no they never called me back  Evan wrote:Since locksmithing is closely related to public safety and the prevention of crime, in many areas where it is regulated by individual counties and NOT handled by a county-wide licensing bureau, I would contact the County Sheriff's office...
As far as your "runaround" experience ? From your viewpoint you did nothing wrong, however from other viewpoints you asked an unanswerable question of agencies who aren't responsible for that specific function... You wouldn't go to the DMV for instance and ask environmental questions about forestry practices in state parks..."
Thanks for the advice I'll try them next. To address what you have said, if someone want's to get a license it should not be difficult to get information about how to it. I was able to find information on how to get a taxi, limousine, and home improvement license within minutes of searching. That's the way it should be. The county has a website and they put on the website all the information. But when it comes to the locksmith license that they made people obligated to get by law, there is not 1 mention of the license on their website. The only thing I could find was a excerpt of the law itself which says nothing specific about who will handle the licensing. So how did I ask unanswerable questions? I called the county licensing bureau to ask about a locksmith license....and the lady confidently told me to call the county clerks office. If there is not a shred of information available about obtaining a licensee what else I am supposed to do? So I did what I was told and followed their advice. I don't believe I can be at fault in this situation for following THEIR instructions and doing what they said to do. I did not just go around calling agencies demanding information. I called the people the county itself recommended i called and every time I explained so forwarded me to you. To compare this to calling the DMV to asking about forest laws is really extreme.

-

Divinorum
- Supporter

-
- Posts: 470
- Joined: 6 Dec 2013 16:18
- Location: New York
-
by Raymond » 29 Mar 2014 17:54
On computer go to your State government page and search for locksmith licensing. I might be connected with alarm providers or security guards.
Search for the State or local locksmith organization active in that area. ALOA is a national organization and usually has State branches.
Look for active LP101 members in your State or city and join them.
Go into any locksmith shop and look at the licensing certificate, that they are probably required by law to post, and see which agency is responsible for supervising them and who to contact in case of a complaint.
You seem frustrated because you are just circling around the subject instead of diving directly into.
Nothing is foolproof to a talented fool. Wisdom is not just in determining how to do something, but also includes determining whether it should be done at all.
-
Raymond
-
- Posts: 1357
- Joined: 18 Jan 2004 23:34
- Location: Far West Texas
by billdeserthills » 22 Apr 2014 22:21
I understand New York has a new program they recently set in place to lure new business, using tax free incentives for ten years! Jump on that!
-
billdeserthills
-
- Posts: 3827
- Joined: 19 Mar 2014 21:11
- Location: Arizona
by GWiens2001 » 22 Apr 2014 23:00
Nooooo, thanks.
Gordon
Just when you finally think you have learned it all, that is when you learn that you don't know anything yet.
-

GWiens2001
- Site Admin
-
- Posts: 7550
- Joined: 3 Sep 2012 16:24
- Location: Arizona, United States
by Eyes_Only » 28 May 2014 0:35
Divinorum wrote:Evan wrote:Since locksmithing is closely related to public safety and the prevention of crime, in many areas where it is regulated by individual counties and NOT handled by a county-wide licensing bureau, I would contact the County Sheriff's office...
As far as your "runaround" experience ? From your viewpoint you did nothing wrong, however from other viewpoints you asked an unanswerable question of agencies who aren't responsible for that specific function... You wouldn't go to the DMV for instance and ask environmental questions about forestry practices in state parks..."
So how did I ask unanswerable questions? I called the county licensing bureau to ask about a locksmith license....and the lady confidently told me to call the county clerks office. If there is not a shred of information available about obtaining a licensee what else I am supposed to do? So I did what I was told and followed their advice. I don't believe I can be at fault in this situation for following THEIR instructions and doing what they said to do. I did not just go around calling agencies demanding information. I called the people the county itself recommended i called and every time I explained so forwarded me to you. To compare this to calling the DMV to asking about forest laws is really extreme.
Welcome to LP101 and to the world of locksmithing Divinorum.  I see you've already met Evan. I did a google search on this too, cos I was curious. This site seemed to offer some leads, but it sounds like you've already gone down that rabbit hole. http://www.nyc.gov/html/dca/html/licenses/062.shtmlThere may be two other ways to get some assistance. Try to see if a NY State Locksmith Association meeting closest to you would be willing to let a new comer sit in on a meeting, and then ask the attendees about any questions you have. http://www.mfsales.com/associat.html I can't guarantee that they will be helpful though. I've heard that the locksmith industry in NY can be kind of a jerk. This is what I did when I had questions about licensing in my state, and helped me out a lot. If that doesn't work out contacting ALOA or SOPL might be worth a shot too. http://www.aloa.org/index.html http://www.sopl.us/Best of luck! I hope this works out for you.
If a lock is a puzzle, then its key is the complete picture
-
Eyes_Only
- Supporter

-
- Posts: 4111
- Joined: 17 Dec 2003 20:33
by Divinorum » 28 May 2014 12:32
Eyes_Only wrote:Divinorum wrote:Evan wrote:Since locksmithing is closely related to public safety and the prevention of crime, in many areas where it is regulated by individual counties and NOT handled by a county-wide licensing bureau, I would contact the County Sheriff's office...
As far as your "runaround" experience ? From your viewpoint you did nothing wrong, however from other viewpoints you asked an unanswerable question of agencies who aren't responsible for that specific function... You wouldn't go to the DMV for instance and ask environmental questions about forestry practices in state parks..."
So how did I ask unanswerable questions? I called the county licensing bureau to ask about a locksmith license....and the lady confidently told me to call the county clerks office. If there is not a shred of information available about obtaining a licensee what else I am supposed to do? So I did what I was told and followed their advice. I don't believe I can be at fault in this situation for following THEIR instructions and doing what they said to do. I did not just go around calling agencies demanding information. I called the people the county itself recommended i called and every time I explained so forwarded me to you. To compare this to calling the DMV to asking about forest laws is really extreme.
Welcome to LP101 and to the world of locksmithing Divinorum.  I see you've already met Evan. I did a google search on this too, cos I was curious. This site seemed to offer some leads, but it sounds like you've already gone down that rabbit hole. http://www.nyc.gov/html/dca/html/licenses/062.shtmlThere may be two other ways to get some assistance. Try to see if a NY State Locksmith Association meeting closest to you would be willing to let a new comer sit in on a meeting, and then ask the attendees about any questions you have. http://www.mfsales.com/associat.html I can't guarantee that they will be helpful though. I've heard that the locksmith industry in NY can be kind of a jerk. This is what I did when I had questions about licensing in my state, and helped me out a lot. If that doesn't work out contacting ALOA or SOPL might be worth a shot too. http://www.aloa.org/index.html http://www.sopl.us/Best of luck! I hope this works out for you.
Eyes thanks very much for your reply. I have since solved this mystery but will consider the advice you have given. It turned out that the licensing bureau was the right place to call, but the person I spoke with on the phone had the wrong information and sent me on a wild goose chase. I called back a few weeks later following the advice I was given from another smith and explained again and they transferred me to the "person who had been in the office the longest" and she was much more helpful. They do indeed handle the locksmith license however......even though the law that requires licensing was passed 10 years ago.......there is still NO application or paperwork to apply for the license. Hence why when you search their website for information about the license there is none and when you call up (unless you are persistent and have done research) they just say no we don't handle that. The excuse was because their workforce had been cut and they barley had enough people to keep on top of the already existing licenses and renewals let alone add an entire new trade into the mix. I asked how this could happen and could it be held against me that I don't have a license. She said that even though the law requires a license, I do not need one at the moment because it is impossible to apply for and that cant be held against me. As far as how this happened in the first place she said that the politicians like to pass feel good laws such as this one, without consulting to see if they have the resources. Very poor planning but what more can we expect from politicians. I still swear this entire situation was straight out of a parks and recreation episode.

-

Divinorum
- Supporter

-
- Posts: 470
- Joined: 6 Dec 2013 16:18
- Location: New York
-
Return to Training & Licensing
Who is online
Users browsing this forum: No registered users and 1 guest
|