Having read the FAQ's you are still unfulfilled and seek more enlightenment, so post your general lock picking questions here.
Forum rules
Do not post safe related questions in this sub forum! Post them in This Old Safe
The sub forum you are currently in is for asking Beginner Hobby Lock Picking questions only.
by coldclimb » 10 May 2018 0:50
So I'm not much of a pro at picking, but I enjoy it as a hobbyist. In my job as a professional firefighter though it can come in handy sometimes on false alarms where we have no glaring reason to believe there is an emergency, but must gain access via whatever means are necessary to make sure before leaving a building. Usually when this is required, we simply break things, like doors and locks. A few days ago on a false alarm, rather than forcing the door with an axe and halligan, I whipped out my tools and picked the deadbolt with a bogota in about three seconds. Upon attempting to re-lock it, however, the tumbler didn't react as I expected, and then locked itself in a slightly off-center position. Thinking maybe I had somehow gotten a pin out of place, I disassembled the lock and promptly broke the whole thing because it's something I have never seen before. Long story short the damage has been resolved (still better than breaking the door) but I would love to get some education on what sort of lock this pile of garbage used to be, and learn what stopped me from re-locking it and how to recognize and avoid that situation in the future. Can anybody point me in the right direction? 
-
coldclimb
-
- Posts: 4
- Joined: 6 Dec 2014 2:37
by stratmando » 10 May 2018 7:38
Looks like a Schlage SecureKey?
-
stratmando
-
- Posts: 1221
- Joined: 26 Nov 2005 21:54
- Location: Florida Keys
by billdeserthills » 10 May 2018 11:26
As said, this 'pile of garbage' was a Schlage Securekey lock, they were discontinued after Kwikset sued Schlage for stealing their 'smartkey' design. Nicest thing I find about the Schlage securekey is that a regular Schlage cylinder (or most anything else) will easily fit in the housing The little + sign above the keyhole is the giveaway for the Securekey cylinder
-
billdeserthills
-
- Posts: 3827
- Joined: 19 Mar 2014 21:11
- Location: Arizona
by coldclimb » 10 May 2018 17:59
That's the one! Thanks guys! Looks like when I picked it, I probably moved it to the reset position and then adjusted the keying and wasn't able to get it to go back into the normal key mode. Very interesting. I will be careful not o do that again! Nice that tgis particular lock has a distinguishing mark on the outside.
-
coldclimb
-
- Posts: 4
- Joined: 6 Dec 2014 2:37
by stratmando » 10 May 2018 19:29
Couple things on Youtube, Search "Schlage SecureKey". They did Copy Kwikset, Having to have a change key made it a pain. Little tool used for Kwikset. Is Great when a home owner needs to change Keys Frequently. You have all the parts, Bet you could put it together keyed to a Schlage Key you already have. Good Luck
-
stratmando
-
- Posts: 1221
- Joined: 26 Nov 2005 21:54
- Location: Florida Keys
by stratmando » 13 May 2018 8:03
I had reset one once and didn't work, Thought I was temporarily screwed, Then with the key pushed 1 pin short of all the way in, it turned and was able to reset correctly. was sure key was all the way in when setting. I wonder if sometimes when people fail on resetting correctly, if they just tried pushing in or out to different depths, if it would be back resettable?
-
stratmando
-
- Posts: 1221
- Joined: 26 Nov 2005 21:54
- Location: Florida Keys
by jeffmoss26 » 13 May 2018 19:16
the only useful part on that lock is the retaining clip. toss the rest!
"I tried smoking a blank once. I was never able to keep the tip lit long enough to inhale." - ltdbjd
-
jeffmoss26
-
- Posts: 1090
- Joined: 13 Jan 2012 15:01
- Location: Cleveland, OH
by GWiens2001 » 13 May 2018 22:48
jeffmoss26 wrote:the only useful part on that lock is the retaining clip. toss the rest!
I'd still like to acquire one for my collection. It may be problematic, but it is still a 3D puzzle to me.  Gordon
Just when you finally think you have learned it all, that is when you learn that you don't know anything yet.
-

GWiens2001
- Site Admin
-
- Posts: 7550
- Joined: 3 Sep 2012 16:24
- Location: Arizona, United States
Return to Got Questions? - Ask Beginner Hobby Lockpicking Questions Here
Who is online
Users browsing this forum: No registered users and 12 guests
|