Masterlock No.3

by **Auto45** » 19 Oct 2005 12:26

I can not get my #3 to open via picking, So I cheat, I have to use the pick-gun or Lock-Shims. On the Master lock you have to use two shims.

by **ThE_MasteR** » 19 Oct 2005 12:44

I suggest you learn how to pick that one first before going to any other harder lock, because that's a very very easy lock. I am now able to pick my Masterlock No.532 without a problem, I just need a good 10-15 minutes, and i'll be able to do it.

Anyways, you just thought me something Auto45, I didn;t know that a Masterlock No.3 could be bypassed using padlock shims. Thanks for that.

by **vector40** » 19 Oct 2005 13:04

O_O You can shim #3s?

Can anyone confirm?

by **ThE_MasteR** » 19 Oct 2005 13:20

vector40 wrote:O_O You can shim #3s?

Can anyone confirm?

Yo, I am AS suprised as you if this can be done, I never would of thought that this can be done on a No.3. I'll have to go buy one and confirm this to everyone. I tried shimming the No.5 on both sides, and no luck. That means the No.5's have something more than the No.3. That's weir, they are the same series..

by **Auto45** » 19 Oct 2005 14:21

Use two shims it will pop up almost all the way, you might need a light tap with hammer or just pull real hard and its opens.
auto

by **ThE_MasteR** » 19 Oct 2005 14:24

Sweet, Thanks for the info, I am going to go and buy one later and try it.

by **ThE_MasteR** » 19 Oct 2005 14:29

Forogt to mention, if you have a camera, can you plz take a video of this in action ?? :lol:

by **Auto45** » 19 Oct 2005 14:53

I will see if I can set up a cam late today and show you guys

by **ThE_MasteR** » 19 Oct 2005 14:59

Auto45 wrote:I will see if I can set up a cam late today and show you guys

Would be nice to see you shimming it, Thanks again lol.

by **Auto45** » 8 Nov 2005 11:15

Here are some movies I made of me raking the Master Lock #3 they are the same movie only edited 2 times, 1st one is the full movie 2nd 1/4th of the movie for my 56kbs friends.
Reminder this is for learning as a hobby or the trade of locksmith, not of illegal actives.

Cable Users:
http://files.filefront.com/Master_Lock_ ... einfo.html

56kbs Users:
http://files.filefront.com/MASTER_LOCK_ ... einfo.html

by **roninjotatan** » 8 Nov 2005 18:42

i have three master lock 3's. they are a counter clockwise turning lock and your best bet is to put a firm "but not uber hard" tension on the wrench and start with the pick already in the back before you start pushing on the wrench. i use a small hook pick and that give me the best results. hope this helps!

by **Mad Mick** » 8 Nov 2005 19:04

roninjotatan wrote:i have three master lock 3's. they are a counter clockwise turning lock and your best bet is to put a firm "but not uber hard" tension on the wrench and start with the pick already in the back before you start pushing on the wrench. i use a small hook pick and that give me the best results. hope this helps!

Better put an extension on that wrench and be prepared to stand on it matey, if you want to snap those pins real good. :wink:

Master #3 is a clockwise turning lock. No "if's", 'but's" or "maybe's"!
Clockwise!! :twisted:

by **illusion** » 8 Nov 2005 19:10

ohh... so finaly a use for my modified crowbar... the "Pin Destroyer"

So if I'm understanding you correctly Mick... you're saying that a master lock turns counter-clockwise?

by **Mad Mick** » 8 Nov 2005 19:41

illusion wrote:So if I'm understanding you correctly Mick... you're saying that a master lock turns counter-clockwise?

Yup!

...and may you be awoken with a severly pustulated scrotum if I'm wrong.

Guess you're screwed either way. :wink:

by **digital_blue** » 8 Nov 2005 19:53

Mad Mick wrote: ...and may you be awoken with a severly pustulated scrotum if I'm wrong.

Aw man... not again....

db

Masterlock No.3

Who is online