Cant get this lock open

[Jason13]

when i push shackle down it sticks then i gotta pull it up. Any suggestions why?

[Jason13]

cant find keys for lock would cliping the ruber ring with scissors do anything cause i want to get it of so i can get it ready.

[Jason13]

is the ring to prevent shimming but it can be easy removed by scissors. And when i push shackle it sticks and then i have to pull it up so what can i do does this make it non- shimable if it sticks when you push on it.

[Jason13]

lets say theres 1 pin in the shackle so you use the back side of shim to push in then you turn so the shackle can push up and un-lock

[illusion]

Jason: Please click[THIS LINK], go to the picture of the padlock shims, and click to see a video of shims in action.

[Jason13]

is there any possabl way to take a padlock apart?

[zeke79]

Most likely if it can be disassembled you can find a screw under the shackle that when loosened will allow the cylinder to be removed from the bottom of the lock. If you can get a clear picture of the bottom of the padlock we can tell you for sure.

[Jason13]

Here you go Zeke


http://img216.imageshack.us/img216/525/picture10nn.jpg

[Jason13]

http://img221.imageshack.us/img221/6431/picture27gr.jpg

[illusion]

no you cannot take this apart with conventional means.

You could make a cuttaway

[Jason13]

ok.

[Jason13]

how do you make snap picks i saw forum but i cant understand

[Jason13]

can you like draw what the bends should be like

[ThE_MasteR]

Here you go Zeke


http://img216.imageshack.us/img216/525/picture10nn.jpg

Lol.

He meant the shackle socket, where there is the latch the keeps the shackle from opening. Where the shackle goes into.

Also, there's an edit button, use it.

[Jason13]

How do you make the snap gun shape and working it and i did search but the images ddnt help