I m nb, and cant do it!

[r4t0]

These are my hook, padlock, tension wrench. why i cant do it, i already read MIT guide, all the forum, used a lot the serach engine, and i cant do it.
obs english isnt my first language

[r4t0]

YOU PROS HELP ME!!!!!

[r4t0]

YOU PROS HELP ME!!!!! Another doubt, the blinding pin is that which have more resistance to lift? i have to set the binding pin first?

[illusion]

right...

that allen-key looks like it needs the end flattened out so it resembles the blade-dege of a screw-driver.

that pick is fine though

BUT!!!! that padlock is a nightmare to pick and I am not suprised you are struggling with it. Papaiz are not the best locks to begin on and there are many better.

GET ANOTHER LOCK!

Unfortunately since you have not supplied the country you live in I cannot advise you further.

I hope this helps

[Shrub]

Wait, patience is a virtue,

Were not paid and do this out of our kindness, were not here all the time.

Your lock may have security pins in it, you need to practice a lot and you need to reread the mit guide or read this http://crypto.com/papers/notes/picking/

Yes you set the binding pin first and then look for the next binding pin and set that one.

Let off a bit of tension im sure you may be useing too much, especially with that clod hopper of a wrench.

[r4t0]

thank you all, and by the way i am brazillian, i ll try something more easy, i m waiting tomorrow to go downtown and bought a practice lock, i did another tension wrench with a steel electrode, but it is to soft, i tempered it but still the same

[illusion]

could you get hold of some old windscreen wiper blades perhaps?

[r4t0]

sorry i dont have a very good english but windscreen wiper blades is that glass cleaner in the cars? (windstopper cleaner = limpador de para brisas i think that translating to english is that)
if its that, i dont think i can get so easy i can use anything else?

[Shrub]

Yes, the rubber thing that wipes the windsheild.

You can use street cleaner bristles,

Just grind your allen key (the one in your picture) down flat at the end and it will be ok for now.

[Pickermeapie]

Yes, the rubber thing that wipes the windsheild.

ha ha!

[Shrub]

Windshield

I before E except after C

[illusion]

LMAO..

[vector40]

I am extremely proud of everyone's responses to this thread.

[illusion]

I am extremely proud of everyone's responses to this thread.

I'm not sure if this was sarcasm, or not

[chopitup]

Worst comes to worse I've even used the metal clip of a pen, just bend it into an "L" shape for an instant tension-wrench.