Having read the FAQ's you are still unfulfilled and seek more enlightenment, so post your general lock picking questions here.
Forum rules
Do not post safe related questions in this sub forum! Post them in This Old Safe
The sub forum you are currently in is for asking Beginner Hobby Lock Picking questions only.
by Badmonkey005 » 27 Dec 2005 13:09
yo I got one of those locks on my Sentry safe...
-
Badmonkey005
-
- Posts: 92
- Joined: 18 Jun 2005 18:47
- Location: Vermont, United States of America
by Auto45 » 27 Dec 2005 16:44
I made a bump key out of that key, I do not know if its going to work  . I need to get the lock to try it on, it may need more filing in some spots.
auto

-
Auto45
-
- Posts: 325
- Joined: 29 Sep 2005 10:34
- Location: Calif. U.S.A
-
by zeke79 » 27 Dec 2005 16:53
If you insert that key into the lock you will not be able to withdraw it. You need the areas between the bitting surfaces to be cut on angles to help push the pins up when inserting the key and once again when withdrawing the key. The way it is cut now, as soon as a pin falls into the first cuts on the key it will be traped as there will be no leading angle to force the pins up to insert it further or trailing angle to force the pins up to withdraw the key.
For the best book out there on high security locks and their operation, take a look at amazon.com for High-Security Mechanical Locks An Encyclopedic Reference. Written by our very own site member Greyman! A true 5 Star read!!
-
zeke79
- Admin Emeritus
-
- Posts: 5701
- Joined: 1 Sep 2003 14:11
- Location: USA
-
by Badmonkey005 » 27 Dec 2005 16:59
that woulda sucked 
-
Badmonkey005
-
- Posts: 92
- Joined: 18 Jun 2005 18:47
- Location: Vermont, United States of America
by Auto45 » 27 Dec 2005 17:05
Badmonkey005 wrote:that woulda sucked 
Ya,Big time 
-
Auto45
-
- Posts: 325
- Joined: 29 Sep 2005 10:34
- Location: Calif. U.S.A
-
by digital_blue » 27 Dec 2005 17:08
Yes, the good news is that you didn't have a lock to try it in, therefore you've saved yourself the hassle of trying to remove that key from the lock.
The bad news is you'll need another key to make a bump key out of. For an idea of how to file the key, think about how a normal bump key works. It has angles cut that still allow the pins to ride up and down the key as the key is moved in and out of the lock. This key would need to have the same. You could get by using a square file and cutting a "V" into the key to a the deepest possible cut on the key, however you'll likely have to guess a little at what that cut might be, as I don't think you'll have an easy time getting proper cut depths for that key. You could always try filing up to the deepest cut that is currently on the key, then cutting a little bit deeper. Should do the trick, thought it'll have to be on a different key because I'm afraid that one is done for.
Cheers!
db
-
digital_blue
- Admin Emeritus
-
- Posts: 9974
- Joined: 6 Jan 2005 15:16
- Location: Manitoba
-
by illusion » 28 Dec 2005 6:11
I cut a bumpkey once and didn't cut both sides of the peaks at angles...
put the key into the padlock all the way, then tried to pull the key back one space.... and that was it... stuck, wouldn't move - I had to get it out one way and that's what led me to make that guide on modifying a tricircle to be repinnable... I got the key out fine after all the pins had been removed lol.
I'm going to make a sodding bump-key for this lock, it's interested me now 
-
illusion
-
- Posts: 4567
- Joined: 2 Sep 2005 13:47
by Chrispy » 28 Dec 2005 7:07
All the keys for the display locks in the showroom have 90 degree cuts on them. Stop people taking the keys out when they're looking at the displays.
Some things may be pick proof, but everything can be bypassed....
-
Chrispy
-
- Posts: 3569
- Joined: 24 Mar 2005 15:49
- Location: GC, QLD
-
by workstation » 28 Dec 2005 8:43
Does anyone actually know of a bump key being used on a cruciform lock before?
Obviously bumping these locks will work if done properly, but it would be nice to see it proved by a lockpicking101 member.
Quite exciting: the thrill of the new!
-
workstation
-
- Posts: 131
- Joined: 17 Sep 2005 9:01
- Location: United Kingdom
by illusion » 28 Dec 2005 8:48
it was my idea 
-
illusion
-
- Posts: 4567
- Joined: 2 Sep 2005 13:47
by n2oah » 28 Dec 2005 12:43
Chrispy wrote:All the keys for the display locks in the showroom have 90 degree cuts on them. Stop people taking the keys out when they're looking at the displays.
I assume these keys operate the locks, too? Very interesting idea on behalf of the managemet.
"Lockpicking is what robbing is all about!" says Jim King.
-
n2oah
-
- Posts: 3180
- Joined: 13 May 2005 22:03
- Location: Menomonie, WI, USA
-
by hzatorsk » 28 Dec 2005 16:16
workstation wrote:Does anyone actually know of a bump key being used on a cruciform lock before?
Obviously bumping these locks will work if done properly, but it would be nice to see it proved by a lockpicking101 member.
Quite exciting: the thrill of the new!
Bump key... nah, not worth the filing time. These locks rake open real easy with the cruciform pick. usually the third or fourth try.
For those so inclined though... Personally... I think the key pictured above is still salvagable. It just needs little peaks made into it.
-
hzatorsk
-
- Posts: 696
- Joined: 20 Jul 2004 11:15
-
by digital_blue » 28 Dec 2005 17:48
n2oah wrote:Chrispy wrote:All the keys for the display locks in the showroom have 90 degree cuts on them. Stop people taking the keys out when they're looking at the displays.
I assume these keys operate the locks, too? Very interesting idea on behalf of the managemet.
Why not just leave the cabinet unlocked then if you can't remove the key?
-
digital_blue
- Admin Emeritus
-
- Posts: 9974
- Joined: 6 Jan 2005 15:16
- Location: Manitoba
-
by Chrispy » 29 Dec 2005 4:36
n2oah: Yes, the keys operate the locks, enabling the customer to see the functions of the lockset, but they cannot remove the key.
Db: There's no cabinets involved. These are deadbolts, knobsets, mortise locks with cylinders, leversets, etc. that have been mounted onto a small wooden stand. The key has 90 degree filed cuts on it and is inserted into the lock and left there. It operates the lock and customers can't remove it.
Some things may be pick proof, but everything can be bypassed....
-
Chrispy
-
- Posts: 3569
- Joined: 24 Mar 2005 15:49
- Location: GC, QLD
-
by digital_blue » 29 Dec 2005 13:28
Ohhhh! I misunderstood completely.  Makes sense now.
db
-
digital_blue
- Admin Emeritus
-
- Posts: 9974
- Joined: 6 Jan 2005 15:16
- Location: Manitoba
-
Return to Got Questions? - Ask Beginner Hobby Lockpicking Questions Here
Who is online
Users browsing this forum: No registered users and 8 guests
|