Manual for a Foley Belsaw 200 machine

[Mothrog]

I recently bought a Foley Belsaw key machine like the one in this thread:

viewtopic.php?t=13504

The problem is, I have no manual for the machine and have no real experience duplicating or cutting keys to code. Comparing my machine and the pictures of the FB 200 key machines I've seen, everything looks the same, with the exception perhaps of my machine's lack of a guard around the cutter. Might anyone that owns a FB 200 (or the machine I have) be willing to share a scan or copy of their manual with me?

[bpc293]

i should be getting mine soon. if you still need it then I'll gladly give you a copy. it should be a few weeks. i also have the manual for the hpc speedex premiere or something the bigger one if anyone needs it.

[LockNewbie21]

You Pm'ed me but i thought i would drop by and say i am looking, its with my work tools for my job... i have to many i know.


But i am looking i will get back ass soon as i get the skimatics for you.


cya bud

[Mothrog]

Great. Thanks again.

[jimb]

You might want to try to call Foley-Belsaw and see if you can get a manual for this model. 1-800-821-3452 If they don't have one it looks the same as the FB200 and you might get by with it's manual.

You can cut depth by code on this machine, but you will need spacer keys to cut the pin spacing. The newer machines have an add on attachment you can buy to cut both by code.

If the manual is not available I would copy it and send it to you with fb's permission. I not willing to do it if it carries a copyright unless they say it's ok.