|
European hardware -lever locks, profile cylinders specific for European locks. European lock picks and European locks.
 by jdport » 13 Dec 2006 3:03
They sell those locks here in Kuwait. I've seen that style on both the DOM and EWA. I bought one that I'm sure no one would guess using magnets AND dimples. Expensive little units.
-
jdport
-
- Posts: 6
- Joined: 8 Mar 2004 1:48
- Location: Kuwait
by jdport » 13 Dec 2006 3:07
This is not a lock sold in the US, as far as I know, so it's not exactly a matter of experienced vs. non-experienced getting it. Unless you've worked more than one continent it's not a fair comparison. I'm sure several of the chinese locks I work with nobody in the UK or US has ever seen.
-
jdport
-
- Posts: 6
- Joined: 8 Mar 2004 1:48
- Location: Kuwait
by greyman » 14 Dec 2006 18:04
SPOILER...
It's a DOM - D. Based on DOM iX design but with a two-bladed key.
Anyone figured my last guess-the-lock yet?
cheers
greyman
-
greyman
-
- Posts: 1026
- Joined: 21 Mar 2005 16:43
- Location: NSW, Australia
by n2oah » 14 Dec 2006 19:43
greyman wrote:Anyone figured my last guess-the-lock yet?
Nope  "Lockpicking is what robbing is all about!" says Jim King.
-
n2oah
-
- Posts: 3180
- Joined: 13 May 2005 22:03
- Location: Menomonie, WI, USA
-
by n2oah » 14 Dec 2006 19:44
Ah, I'd like to get a Model D for myself, anyone know where to find one?
"Lockpicking is what robbing is all about!" says Jim King.
-
n2oah
-
- Posts: 3180
- Joined: 13 May 2005 22:03
- Location: Menomonie, WI, USA
-
by greyman » 20 Dec 2006 11:27
OK, no takers? The last lock I posted was a Helason 4 x 4 pin from a dead latch mechanism. Helason is an Austrian company. They key is hollow with 4 cuts per side (on 4 sides).
-
greyman
-
- Posts: 1026
- Joined: 21 Mar 2005 16:43
- Location: NSW, Australia
by greyman » 24 Dec 2006 15:39
Hope everyone is enjoying their Christmas 
Here's another guess the lock for those who might be browsing during the festive season...
-
greyman
-
- Posts: 1026
- Joined: 21 Mar 2005 16:43
- Location: NSW, Australia
by n2oah » 24 Dec 2006 17:34
I think I recognise the keyway. It's definetly a pump lock-- probably a Muel with 8 levers?
"Lockpicking is what robbing is all about!" says Jim King.
-
n2oah
-
- Posts: 3180
- Joined: 13 May 2005 22:03
- Location: Menomonie, WI, USA
-
by jabial » 24 Dec 2006 18:48
Looks like it.
Non Serviam!
-
jabial
- Supporter
-
- Posts: 127
- Joined: 13 Feb 2004 20:53
- Location: Paris, France
by greyman » 25 Dec 2006 6:36
Right on Muel, wrong on number of levers (it's 10), but I'm impressed 
Over to you n2oah!
-
greyman
-
- Posts: 1026
- Joined: 21 Mar 2005 16:43
- Location: NSW, Australia
by n2oah » 25 Dec 2006 20:44
Aye, I won't have anthing for a while. But I might get an RKL-10 soon!
"Lockpicking is what robbing is all about!" says Jim King.
-
n2oah
-
- Posts: 3180
- Joined: 13 May 2005 22:03
- Location: Menomonie, WI, USA
-
by n2oah » 26 Dec 2006 14:35
Ah, I should've checked my Muel key then.
"Lockpicking is what robbing is all about!" says Jim King.
-
n2oah
-
- Posts: 3180
- Joined: 13 May 2005 22:03
- Location: Menomonie, WI, USA
-
by mh » 29 Dec 2006 4:47
Here's my holiday season special for you:
Now, that's a difficult one, right?
Cheers,
mh "The techs discovered that German locks were particularly difficult" - Robert Wallace, H. Keith Melton w. Henry R. Schlesinger, Spycraft: The secret history of the CIA's spytechs from communism to Al-Qaeda (New York: Dutton, 2008), p. 210
-
mh
- Moderator
-
- Posts: 2437
- Joined: 3 Mar 2006 4:32
- Location: Germany
-
by n2oah » 29 Dec 2006 19:40
I'm not sure what that is...
but it looks a lot like a TOC cylinder?
"Lockpicking is what robbing is all about!" says Jim King.
-
n2oah
-
- Posts: 3180
- Joined: 13 May 2005 22:03
- Location: Menomonie, WI, USA
-
by mh » 30 Dec 2006 6:06
n2oah wrote:I'm not sure what that is...
but it looks a lot like a "TOC cylinder"?
What's a TOC cylinder?
I believe this version of the cylinder is just used for custom applications, such as steering wheel locks.
But what can you guess about the lock mechanism, etc.?
Cheers,
mh "The techs discovered that German locks were particularly difficult" - Robert Wallace, H. Keith Melton w. Henry R. Schlesinger, Spycraft: The secret history of the CIA's spytechs from communism to Al-Qaeda (New York: Dutton, 2008), p. 210
-
mh
- Moderator
-
- Posts: 2437
- Joined: 3 Mar 2006 4:32
- Location: Germany
-
Return to European Locks, Picks and Hardware
Who is online
Users browsing this forum: No registered users and 0 guests
|
