When it comes down to it there is nothing better than manual tools for your Lock pick Set, whether they be retail, homebrew, macgyver style. DIY'ers look here.
by RockInBlack » 13 Apr 2007 15:12
Does it really matter? Won't the tips break way before the handle does?
-
RockInBlack
-
- Posts: 53
- Joined: 28 Jul 2006 14:12
by Wolfe » 13 Apr 2007 15:24
im not sure what a reinforced lockpick is. But if your pushing hard enough to break any part of the lock pick your exerting way way to much pressure and or torque.
-
Wolfe
-
- Posts: 247
- Joined: 9 Jan 2007 11:56
- Location: East Coast
by freakparade3 » 13 Apr 2007 15:28
I assume that you are refering to the laminated style handles. It's not really a matter of reinforcement, it's just a handle. Which ones to get is a matter of personal preference. When I first started picking I loved the picks with the big nice handles, they were more comfortable to use. Now I prefer picks with no handles. I get better feedback with them. Try all the styles and see what you prefer.
-
freakparade3
- Moderator Emeritus
-
- Posts: 3457
- Joined: 17 Sep 2006 12:01
- Location: Cedar Rapids, Iowa
by Exodus5000 » 13 Apr 2007 15:42
The re-enforcement on the handles are more for comfort. It's a lot easier on your hands to hold a thicker handle than to have a single piece of metal cutting into your fingers as you pick.
[deadlink]http://img441.imageshack.us/img441/6973/exodus5000ac5.jpg
-
Exodus5000
-
- Posts: 952
- Joined: 6 Apr 2004 23:57
- Location: Sturgeon Bay, Wisconsin, USA
by RockInBlack » 13 Apr 2007 15:46
Well suppose I got the 14 piece set with grips, it'd be alright?
-
RockInBlack
-
- Posts: 53
- Joined: 28 Jul 2006 14:12
by Kaotik » 13 Apr 2007 15:46
Like freakparade3 said, it is all about personal preference on feed-back and comfort.
You could also try making some picks out of hacksaw blades with different handles and one without a handle to make a final decision about them.
-
Kaotik
- Moderator Emeritus
-
- Posts: 1200
- Joined: 10 Jun 2006 13:38
- Location: Texas, USA
by freakparade3 » 13 Apr 2007 17:37
RockInBlack wrote:Well suppose I got the 14 piece set with grips, it'd be alright?
Check out www.lockpicktools.com You can get picksets with an assortment of handle styles. They have good tools, and are reasonably priced. Then you can use the different types and see what works best for you 
-
freakparade3
- Moderator Emeritus
-
- Posts: 3457
- Joined: 17 Sep 2006 12:01
- Location: Cedar Rapids, Iowa
by Wolfe » 13 Apr 2007 18:37
If your really want a answer i would say get the ones with handles.
some pros and cons
When your are beginning some of the skills you will have to master are hand/pick posture + hand/pick control and it will be not as difficult to learn using a pick with a handle.
Everyone has thier own way to hold thier pick even know most are related its still what feels comfortable to you. While you are figuring this out you are more likely to tear up your hand with a handless pick.
but on the other side of the coin a handless pick will usually give you a little better reading on the lock.
This could go on for a while with opinions that go either way.My suggestion to you is to get the pick with the handle for comfort.
-
Wolfe
-
- Posts: 247
- Joined: 9 Jan 2007 11:56
- Location: East Coast
by JackNco » 13 Apr 2007 20:03
I have the Regular handles on my SO picks but ill get some layered handles next time i order for hooks.
-
JackNco
-
- Posts: 3149
- Joined: 14 Apr 2006 12:26
- Location: Coventry. UK
by raimundo » 14 Apr 2007 11:57
you might find one of those reinforced finger cots with the ticklers all over it that they use in places like the post office, and put this on the abused finger.
-
raimundo
-
- Posts: 7130
- Joined: 21 Apr 2004 9:02
- Location: Minnneapolis
by bumber » 14 Apr 2007 12:59
raimundo wrote:you might find one of those reinforced finger cots with the ticklers all over it that they use in places like the post office, and put this on the abused finger.
That gives me an idea....if they wont slip off that would be a new way for homade picks to have handles.
Also how does everyone hold there picks? (In the average lock, like index&thumb,whole hand etc..) I use index,middle and thumb.
-
bumber
-
- Posts: 763
- Joined: 3 Apr 2007 21:20
- Location: Florida
-
by freakparade3 » 14 Apr 2007 13:24
bumber wrote:Also how does everyone hold there picks? (In the average lock, like index&thumb,whole hand etc..) I use index,middle and thumb.
I hold the pick just like it's a pencil.
-
freakparade3
- Moderator Emeritus
-
- Posts: 3457
- Joined: 17 Sep 2006 12:01
- Location: Cedar Rapids, Iowa
by JackNco » 14 Apr 2007 14:34
I move about all over the place but my default grip is to place my first 2 fingers on one side with my thumb in between them on the other side and my third finger resting on the lock
-
JackNco
-
- Posts: 3149
- Joined: 14 Apr 2006 12:26
- Location: Coventry. UK
by Kaotik » 14 Apr 2007 15:12
I hold my picks in a similar fashion as holding a eating utencil. The front of the pick (near the tang) rests on my middle finger, my thumb rests and on the back of the pick and my index finger stabilizes (<-SP?) the side.
I hold the lock in my right hand if there padlocks, the rest of my locks are mounted in a vice or on boards, doors ect.
-
Kaotik
- Moderator Emeritus
-
- Posts: 1200
- Joined: 10 Jun 2006 13:38
- Location: Texas, USA
Return to Lock Picks
Who is online
Users browsing this forum: No registered users and 1 guest
|