Is this Bump key messed up?

[JackNco]

u need to get the spacing correct. that looks way off 2 me. or just buy one. or get a locksmith to cut one for you.

[JackNco]

u need to get the spacing correct. that looks way off 2 me. or just buy one. or get a locksmith to cut one for you.

[xXFaizeXx]

Ok well that was my only Master key blank i still have a Schlage and a Kwickset
is there anywhere that could help me with them i wish there were templates.

[UWSDWF]

search and ye shall find

[Trip Doctor]

You can use a regular key as a template. Just make all your cuts very low, but with the same spacing. Where the peaks are on the real key, they should be on the blank key, except lower.

[xXFaizeXx]

Wait trip are you sayin all the little tiangles arent suppose to be the same height?

[UWSDWF]

search and find the bump key pdf ... read it twice and then once outloud before you ask anymore questions

[JackNco]

*sigh* You really should be searching for this stuff. but you can cut a regular key down. you need to research and find the root depth of a 9 cut on the key you are making for a specific lock.

[jimmysmith]

heres some information.. there depths... root depths.. spacings..

but with out a cailiper... it will be hard.. like mentioned before.. I would find an old key with a really deep cut.. and get the spacing and depth information from that..

http://web.archive.org/web/200512140315 ... pacing.htm

[zeke79]

Here is a picture of a master M1 bump key. Print it at various scales until it matches the size of your blank key.

[xXFaizeXx]

Thanks everyone up i did a little more fileing and i got the key to work very well now ihave a youtube video with it heres the link.

http://youtube.com/watch?v=0Wuaj3Rq3zs

Thanks for the help!