Having read the FAQ's you are still unfulfilled and seek more enlightenment, so post your general lock picking questions here.
Forum rules
Do not post safe related questions in this sub forum! Post them in This Old Safe
The sub forum you are currently in is for asking Beginner Hobby Lock Picking questions only.
by Technologic » 10 Aug 2007 16:42
Today is my first day trying lock picking. I ordered a 3 wrenches, an "S" rake, a short hook tool and a small half diamond pick about 3 days ago and they arrived this morning. I went to the locksmiths shop and I talk to him for a bit about a good practice lock, and I ended up with a kwikset cylinder. He also gave me a free plug follower to help me remove the pins, and he showed me how to do it.
This is where the problems started. I lost track of which pin went where because I didn't know enough to take them out one by one. But now I have re assembled the lock a couple of times, and it now functions normally other than a few out of place clicking noises which could be caused by one of the springs being bent.
My question is, how do I know if the pins are in the right place? I picked 1, 2, and 3 pins successfully after reassembling the lock to certain degrees and am working on 5. However, I'm not sure if this sucess is only do to a few of the pins being out of place and only one actually needing picking. Anyone got any ideas?
-
Technologic
-
- Posts: 3
- Joined: 10 Aug 2007 13:45
by UWSDWF » 10 Aug 2007 16:58
pins with round bottoms are bottom pin and the flat ones are driver pins and placement of bottom pins doesn't matter if your picking
 DISCLAIMER:repeating anything written in the above post may result in dismemberment,arrest,drug and/or alcohol use,scars,injury,death, and midget obsession.
-
UWSDWF
- Supporter

-
- Posts: 4786
- Joined: 27 May 2006 13:01
- Location: Toronto, ON. Canada
by Kaotik » 10 Aug 2007 17:19
The spring(s) being bent wouldn't make a noticable clicking noise or if any at all, so I don't think that is your problem.
Try making sure you don't have the key-pins (bottom pins) where the driver pins should be or the other way around (vice versa).
-
Kaotik
- Moderator Emeritus
-
- Posts: 1200
- Joined: 10 Jun 2006 13:38
- Location: Texas, USA
by Technologic » 10 Aug 2007 17:36
You guys were right, I had my pins mixed up but now it's fixed. Thanks for the help.
-
Technologic
-
- Posts: 3
- Joined: 10 Aug 2007 13:45
by questions » 10 Aug 2007 21:46
its all part of the learning experience.
-
questions
-
- Posts: 46
- Joined: 22 Jun 2007 20:29
- Location: North Las Vegas, NV
-
by maintenanceguy » 12 Aug 2007 9:21
questions wrote:its all part of the learning experience.
We need more of that helpful, understanding attitude around here.
I expected the poor guy to be blasted by 8 people for not using the search function or asking a question in violation of rule 48.7-C sub section J.
-
maintenanceguy
-
- Posts: 349
- Joined: 17 Feb 2007 14:05
- Location: North East, USA
by Eyes_Only » 12 Aug 2007 10:30
What kind of lock is it? If it is a Kwikset lock it can be hard for a beginner to tell the difference betweeen the top pins and bottom pins.
If a lock is a puzzle, then its key is the complete picture
-
Eyes_Only
- Supporter

-
- Posts: 4111
- Joined: 17 Dec 2003 20:33
by Oliwerko » 12 Aug 2007 15:54
maintenanceguy wrote: We need more of that helpful, understanding attitude around here.
I expected the poor guy to be blasted by 8 people for not using the search function or asking a question in violation of rule 48.7-C sub section J.
Do you know why these people get blasted ? Because when they just don't search and ask right away without bothering reading any FAQ or something similar, just because they are lazy to do it, they deserve to get blasted. When everyone is going to directly ask, we'll have a new topic every minute. Everyone see mistakes in other people, not in himself. That's the problem. The rules are here to help, not to make things complicated. You don't like them? No one forces you to be here.
-
Oliwerko
-
- Posts: 53
- Joined: 6 Sep 2006 15:13
- Location: Slovakia - yes, that little dot on the map under Poland!
by UWSDWF » 13 Aug 2007 12:24
maintenanceguy wrote:questions wrote:its all part of the learning experience.
We need more of that helpful, understanding attitude around here. I expected the poor guy to be blasted by 8 people for not using the search function or asking a question in violation of rule 48.7-C sub section J.
An then we'll all hung and look at our vaginas with hand mirrors and just appreciate things like tofu, birkenstocks and loreal hair dye
EVERYBODY now.... ohhhhm... ohhhmmmmm ohhm ohhhhmmmm
 DISCLAIMER:repeating anything written in the above post may result in dismemberment,arrest,drug and/or alcohol use,scars,injury,death, and midget obsession.
-
UWSDWF
- Supporter

-
- Posts: 4786
- Joined: 27 May 2006 13:01
- Location: Toronto, ON. Canada
by RangerF150 » 13 Aug 2007 13:30
maintenanceguy wrote:questions wrote:its all part of the learning experience.
We need more of that helpful, understanding attitude around here. I expected the poor guy to be blasted by 8 people for not using the search function or asking a question in violation of rule 48.7-C sub section J.
The guy did all the right things!
Got his picks, went off to a locksmiths got a lock to play with, had a go at taking it apart and putting it all back together again, and learning to pick it pin by pin.
Having done all this he is well entitled to ask a question, and got the answers that helped him fix his problem.
He ain't the n00b with the pick stuck in the door lock of his neighbours car, or some such story.
People are more than helpful around here to those that in some way try to help themselves , and display this , which he clearly did.
Proudly posted on a FreeBSD powered laptop 
-
RangerF150
- Supporter

-
- Posts: 567
- Joined: 24 Jul 2004 17:32
- Location: Dublin Ireland
by Dragunov-21 » 13 Aug 2007 18:15
UWSDWF wrote:An then we'll all hung and look at our vaginas with hand mirrors and just appreciate things like tofu, birkenstocks and loreal hair dye EVERYBODY now.... ohhhhm... ohhhmmmmm ohhm ohhhhmmmm
You are a strange and disturbing man... 
-
Dragunov-21
-
- Posts: 169
- Joined: 21 Jun 2007 19:18
- Location: Launceston, TAS, Australia
by Shrub » 14 Aug 2007 6:33
maintenanceguy wrote:questions wrote:its all part of the learning experience.
We need more of that helpful, understanding attitude around here. I expected the poor guy to be blasted by 8 people for not using the search function or asking a question in violation of rule 48.7-C sub section J.
My oh my are you gogin to get this thrown back at your in the future when you realise why this happens and that you find yourself doing the same, its all stored to memory and im waiting for your first noob bashing 
-
Shrub
- Moderator Emeritus
-
- Posts: 11576
- Joined: 23 May 2005 4:03
- Location: uk
by maintenanceguy » 14 Aug 2007 15:17
Shrub wrote:My oh my are you gogin to get this thrown back at your in the future when you realise why this happens and that you find yourself doing the same, its all stored to memory and im waiting for your first noob bashing 
I think you'll have a long wait.
Because of the subject matter here (lockpicking), I'm probably right to assume that the average age here is about 17 and 99% male. (If you don't believe it, find me one lockpicking movie on U-tube made by a guy over 25 or by a female). 17 and male means a lot of testosterone and still trying to prove how tough you are. And there's no safer place to blow off some testosterone and be tough than an internet discussion forum.
I haven't see 17 in a couple of decades. I haven't needed to show off how tough I was for a long time. I just can't see myself blasting anyone on the internet.
-
maintenanceguy
-
- Posts: 349
- Joined: 17 Feb 2007 14:05
- Location: North East, USA
by Proctor » 14 Aug 2007 15:38
Because of the subject matter here (lockpicking), I'm probably right to assume that the average age here is about 17 and 99% male. (If you don't believe it, find me one lockpicking movie on U-tube made by a guy over 25 or by a female). 17 and male means a lot of testosterone and still trying to prove how tough you are. And there's no safer place to blow off some testosterone and be tough than an internet discussion forum.
I haven't see 17 in a couple of decades. I haven't needed to show off how tough I was for a long time. I just can't see myself blasting anyone on the internet.
http://uk.youtube.com/watch?v=oGtgiF_0Y7I - There ya go a female lockpicker over 25 years old  btw, im 15 years old and 16 in October 
-
Proctor
-
- Posts: 158
- Joined: 25 Jul 2007 4:53
- Location: Uk, Liverpool.
by Trip Doctor » 14 Aug 2007 15:51
And there's no safer place to blow off some testosterone and be tough than an internet discussion forum.
..Holy shitnuts, I hope that was some sort of sarcasm..
I refer to UW's vagina comment. 
-
Trip Doctor
-
- Posts: 597
- Joined: 18 Feb 2007 23:17
- Location: MN, US
Return to Got Questions? - Ask Beginner Hobby Lockpicking Questions Here
Who is online
Users browsing this forum: No registered users and 10 guests
|