Having read the FAQ's you are still unfulfilled and seek more enlightenment, so post your general lock picking questions here.
Forum rules
Do not post safe related questions in this sub forum! Post them in This Old Safe
The sub forum you are currently in is for asking Beginner Hobby Lock Picking questions only.
by SystemeD » 4 Dec 2007 10:12
Hi all,
I recently started lockpicking some very cheap padlocks I had and I opened them without any problems with paperclips, etc...
Now I'd like to know what to do next.
I'd like to buy a pickset but to pick what?
I saw that good padlocks and locks are expensive so what and where to buy products to test and improve my skills?
Thanks in advance!
-
SystemeD
-
- Posts: 5
- Joined: 23 Nov 2007 5:30
by Beyond » 4 Dec 2007 10:18
Dollar store or Wal Mart. Try craigslist now and then, and eBay for bulk deals.
If your interest is in automotive lock picking, call up local junkyard owners and try to create some form of deal that would let you come by once a week or something and practice on junk cars.
-
Beyond
-
- Posts: 412
- Joined: 23 Nov 2007 1:00
by freakparade3 » 4 Dec 2007 10:30
You can get deadbolt locks pretty cheap at stored like Wal-Mart. They have a brand called "Mountain Security" for about $8 you get a 5 pin deadbolt. It's a good starter lock.
-
freakparade3
- Moderator Emeritus
-
- Posts: 3457
- Joined: 17 Sep 2006 12:01
- Location: Cedar Rapids, Iowa
by SystemeD » 5 Dec 2007 6:19
Thanks for your reponse, but I forgot to tell that I live in France and I don't think I could buy from Walmart so I'll look for "Mountain Security" dealers in Europe.
However could you make a list of the best brand for practicing in order of difficulty (if it is possible)?
Last question is what picks are really necessary for a good set (except the specials one)?
Thank you very much!
-
SystemeD
-
- Posts: 5
- Joined: 23 Nov 2007 5:30
by raimundo » 5 Dec 2007 9:28
check CLUSIF.asso.fr and see if there is relevant information there for you.
Wake up and smell the Kafka!!!
-
raimundo
-
- Posts: 7130
- Joined: 21 Apr 2004 9:02
- Location: Minnneapolis
by mrdan » 5 Dec 2007 11:31
In my line of work I often run into clients changing their doors after break-in has occurred I usually ask if I can take the lock off the old door. They sometimes say yes and sometimes no. My point is, it might pay off to go around looking for places where the doors (and locks) are being either changed or removed and ask. Of course this is more effective if you look like you have good reason. I am an alarm tech / locksmith so it isn't too much of a stretch for me to have valid need of a lock. ( I usually tell them it is for training and practice and I can repair/recondition the lock to use for parts, etc...) Another place to ask is at self storage places. The current tenant doesn't pay rent and after a while they cut the locks and empty the shed. and then they have a bunch of cut padlocks. Sometimes they throw them away but sometimes they keep the carcasses in a bucket.
NyQuil, the stuffy, sneezy, why-the-heck-is-the-room-spinning medicine.
-
mrdan
-
- Posts: 356
- Joined: 5 Aug 2006 1:34
- Location: Dallas, TX
-
by freakparade3 » 5 Dec 2007 11:41
I'm sure in France there must be a wal-mart type discount store. They all sell locks. Just get a cheap deadbolt of any brand. With a deadbolt you can repin it to make it easier or more difficult to pick. As for tools, it depends on preferance. I only use hooks and rakes, but some people here only use half diamonds. I'd say if you have a few hooks of different sizes, a half diamond, and a few rakes you will have a good starter set. In my opinion having a large variety of tension tools is more important than having alot of picks. You can make tension tools out of windshield wiper blade inserts. Make several different lengths of tension tools and several with different bends to insert into the lock.
-
freakparade3
- Moderator Emeritus
-
- Posts: 3457
- Joined: 17 Sep 2006 12:01
- Location: Cedar Rapids, Iowa
by Gordon Airporte » 5 Dec 2007 23:17
In France they call a Target a "Tar-zhay".
Wal-Mart's a Wal-Mart but they call it "Le Wal-Mart".
-
Gordon Airporte
-
- Posts: 812
- Joined: 15 Sep 2005 13:22
- Location: Baltimore
by Deathadder » 5 Dec 2007 23:47
two words, brinks shrouded.
you can get them from wal-mart
It's ok guys, i have a really bad attention sp-wow look, a beach!
-
Deathadder
-
- Posts: 546
- Joined: 22 May 2006 13:05
- Location: Ocala, Florida
by freakparade3 » 6 Dec 2007 9:27
Deathadder wrote:two words, brinks shrouded.
you can get them from wal-mart
For a beginner it's not a good choice. The Brinks shrouded lock is like a rite of passage with lockpickers. When you get comfortable picking regular padlocks and deadbolts try the Brinks shrouded. It wil likely take weeks or even months for you to learn to pick it, but when you finally do you will feel like you really accomplished something great!
-
freakparade3
- Moderator Emeritus
-
- Posts: 3457
- Joined: 17 Sep 2006 12:01
- Location: Cedar Rapids, Iowa
by raimundo » 6 Dec 2007 10:04
when you open a brinks shrouded for the first time, quickly relock it and redo the picking, that is how you will learn, there is some sense or feel that is indiscribable but that will still be in your hand at the time that it opens and you should be able to do it again in a relatively short time. besides the ineffable muscle memory the lock has just broken through the psychological barrier that made it seem unpickable.
When learning, when you succeed, just repeat right away, this is the best way to learn permanently
Wake up and smell the Kafka!!!
-
raimundo
-
- Posts: 7130
- Joined: 21 Apr 2004 9:02
- Location: Minnneapolis
by Deathadder » 6 Dec 2007 18:24
freakparade3 wrote:For a beginner it's not a good choice.
he said he wanted something harder  lol
It's ok guys, i have a really bad attention sp-wow look, a beach!
-
Deathadder
-
- Posts: 546
- Joined: 22 May 2006 13:05
- Location: Ocala, Florida
by SystemeD » 10 Dec 2007 17:50
Thanks all for your answers! I'll give it a try but for the moment I really cannot find something like walmart here and "good" (I really don't know how much good is a vachette or abus) padlocks and deadbolt are really expensive 70-150€!!!
However I just spend 11€ to buy an Abus 55/30 and I opened it in 30 sec with paperclips!
I'd like to know if it could be repinned and how this could make it more difficult to pick?
Thanks again!
PS: Still waiting for info about dougfarre package....
-
SystemeD
-
- Posts: 5
- Joined: 23 Nov 2007 5:30
by Squelchtone » 10 Dec 2007 17:54
Gordon Airporte wrote:In France they call a Target a "Tar-zhay". Wal-Mart's a Wal-Mart but they call it "Le Wal-Mart".
haha!
priceless..
+1 for the Pulp Fiction quote.
-

Squelchtone
- Site Admin
-
- Posts: 11307
- Joined: 11 May 2006 0:41
- Location: right behind you.
Return to Got Questions? - Ask Beginner Hobby Lockpicking Questions Here
Who is online
Users browsing this forum: No registered users and 4 guests
|