KEY STUCKUP, how to remove it and solve the problem

[yono]

Hi friends, these are few tips of how to resolve an issue of a stuckup key in the lock cylinder core. hope this help lot of you that will encounter this kind of trouble. regards.
http://www.youtube.com/watch?v=aMyBvYu_PL8

[Theist17]

Thanks for the video! Cool stuff.

I feel that it's worth noting, though, that it's useful to be careful not to overtighten that retaining nut or screw. It'll make it seriously difficult to turn the plug if you do.

[yono]

you're right Theist17, over tightening the screws could led to screw breakage sometimes, also, I've noticed most decent locks cylinders now and with their right cam installed..they leave a micro space from the cylinder housing and the core, thereby, they wont be affected by a tightened retaining screws, whereby the cam lies on the core but not touching the Cylinder housing. Other lock producers, they apply some kind of a solvent to prevent the retaining screws from loosening up. generally speaking you're suggestion is the right one.."never overtightened the retaining screws." thanks pal.