Need this Best keyway ID's, having trouble picking it

[MJK_Tool]

I looked on the PDF of Best keyways and can't find this one:

https://lh5.googleusercontent.com/-CYhE ... IMG088.jpg

I'm having trouble picking it. Wanted to get it into control and put a core in that I have keys for. The first pin is sitting high up in the plug. Perhaps the pins fell out?

[femurat]

Why do you think knowing the ID could help picking it?

Good luck anyway

[MJK_Tool]

Why do you think knowing the ID could help picking it?

Good luck anyway

So I can get blanks for it once I get it out of the lock. So I could get a bump key made for it. So I know more about a core I own.

[Squelchtone]

You can't find it because its not a BEST keyway. It's a PEAKS keyway, a system owned by KABA and licensed/sold to BEST. Have fun picking it, PEAKS uses this tricky pin in the 1st pin stack, check out youtube for some pointers. Also, the blade of the key has a little bump (the peak) on the bottom, opposite side of the key cuts. Good luck finding a blank, it's a system with strong key control, so unless you are anuthorized agent on the system, it will be awful hard to order a blank. Ebay may have some but god knows what number that blank is. It doesn't look like D, G, H, or R keyway.

http://www.bestaccess.com/media/Brochures/Peaks%C2%AE%20brochure.pdf

Squelchtone

[MJK_Tool]

Awesome. I'll get it drilled then, I have a core I need repinned so I'll get it done in one shot. The listing said G keyway, I guess I need to read more before I buy.

Thanks guys.

[MJK_Tool]

Do these have anti-drill pins in them?

[femurat]

So you're going to destroy such a beautiful core just to use the padlock body?
Why don't you sell it instead? Or send it to a fellow picker to enjoy picking it, keep the core for his collection and send the lock body back to you for free...

Cheers

[RomeoFoxtrot]

Do these have anti-drill pins in them?

No, there are no inserts in the core or the pins.

It is a different keyway from what I've seen. I maintain several Peaks systems for my company and they use the "B1" according to the PDF floating around. Our keys say different but anyhow. Even as a customer Best will not sell us blanks for Peaks. We can get just about anything except for Peaks blanks. And a cut Peaks key for us is pretty pricey for a scale slightly higher than GSA.

Peaks are best left alone unless you have the skills to remove the core (and understand Peaks operation, OP) or it comes with a Control key. Don't waste the money. Maybe request pictures next time. A G looks quite different than a Peaks.

[clearmoon247]

I would hate to see that core drilled and i would gladly get you another padlock for the chance at having that one

[MJK_Tool]

Do these have anti-drill pins in them?

No, there are no inserts in the core or the pins.

It is a different keyway from what I've seen. I maintain several Peaks systems for my company and they use the "B1" according to the PDF floating around. Our keys say different but anyhow. Even as a customer Best will not sell us blanks for Peaks. We can get just about anything except for Peaks blanks. And a cut Peaks key for us is pretty pricey for a scale slightly higher than GSA.

Peaks are best left alone unless you have the skills to remove the core (and understand Peaks operation, OP) or it comes with a Control key. Don't waste the money. Maybe request pictures next time. A G looks quite different than a Peaks.

Actually I bit before finding that nice PDF with the key profiles on the net (through here actually). The listing did have pictures I'm just really eager to get into SFIC finally.