Information about locks themselves. Questions, tips and lock diagram information should be posted here.
by GWiens2001 » 2 Sep 2014 22:28
Congratulations! You will find them to be a fun challenge. You will get to be pretty good and fast with serrated pins with some practice.
Notice your 5260 was pinned with five pin stacks out of six pin channels. That is standard for the 5260. But you can get a longer key blank and add a pin stack.
Keep it up!
Gordon
Just when you finally think you have learned it all, that is when you learn that you don't know anything yet.
-

GWiens2001
- Site Admin
-
- Posts: 7550
- Joined: 3 Sep 2012 16:24
- Location: Arizona, United States
by Hachronn » 2 Sep 2014 22:36
C-Horse wrote:GOT ONE !!!! So happy I pick this thing
Grats C-Horse! That's a hell of a fun lock to pick.
-- I have a tendency to write hasp when I mean shackle. It's a bad habit, but I'm working on it one day at a time.
If you find my insistence that you pay me to do something unreasonable, you probably shouldn't be bothering me at work.
-
Hachronn
- Supporter

-
- Posts: 135
- Joined: 7 May 2013 14:22
- Location: Southern California
by Robotnik » 3 Sep 2014 0:10
  Certainly no American 5260 (congrats, btw), but decided I'd introduce myself to dimple lock picking with an AutoLock Pro (sort of like a Club for the brake/clutch pedal). Turned out that I pitched myself a major softball; lock itself is six pins, but in the twenty minutes between when I got home from work and my wife got home, I'd already picked it nine times. Just...don't buy one of these. Ever. Any suggestions for a better intro to dimple lock picking?
-
Robotnik
- Supporter

-
- Posts: 668
- Joined: 3 Aug 2014 16:21
- Location: Portland, Oregon, United States
by GWiens2001 » 3 Sep 2014 1:34
Robotnik wrote:  Certainly no American 5260 (congrats, btw), but decided I'd introduce myself to dimple lock picking with an AutoLock Pro (sort of like a Club for the brake/clutch pedal). Turned out that I pitched myself a major softball; lock itself is six pins, but in the twenty minutes between when I got home from work and my wife got home, I'd already picked it nine times. Just...don't buy one of these. Ever. Any suggestions for a better intro to dimple lock picking?
Actually think it is 10 pins - four to a side and two on the edge. And easy as can be to pick. Got one a while back for five bucks at a thrift store...  Same key (just shine from the light reflecting on the key). The key I think is faster is below the red key.  Picks in 5-10 seconds with a Bogota. And no, I don't use it. Thought it would be a better pick than it was. Gordon
Just when you finally think you have learned it all, that is when you learn that you don't know anything yet.
-

GWiens2001
- Site Admin
-
- Posts: 7550
- Joined: 3 Sep 2012 16:24
- Location: Arizona, United States
by Robotnik » 3 Sep 2014 11:38
GWiens2001 wrote:Actually think it is 10 pins - four to a side and two on the edge. And easy as can be to pick. Got one a while back for five bucks at a thrift store...  Same key (just shine from the light reflecting on the key). The key I think is faster is below the red key.  Picks in 5-10 seconds with a Bogota. And no, I don't use it. Thought it would be a better pick than it was. Gordon
This one was definitely six; there were twelve dimples on the key (five bits on each side, with two on opposing edges), but in examining the keyway, only one half was pinned. The other was blank space. The manufacturer must have started some ill-advised cost cutting between our respective thrift store pickups (though I paid six bucks for mine, so I think you got the better deal)  . SPP'd it a few times with a Peterson #1 hook, then tried the butt end of a SouthOrd tension wrench. That worked too. Almost too easy to keep around as a confidence booster, even  .
-
Robotnik
- Supporter

-
- Posts: 668
- Joined: 3 Aug 2014 16:21
- Location: Portland, Oregon, United States
-
C-Horse
- Supporter

-
- Posts: 114
- Joined: 5 Aug 2014 2:31
- Location: Largo Florida
by GWiens2001 » 5 Sep 2014 22:28
C-Horse - the serrated pins do have a distinct feel to them. Once you get the feel, they are pretty fun to pick.
Gordon
Just when you finally think you have learned it all, that is when you learn that you don't know anything yet.
-

GWiens2001
- Site Admin
-
- Posts: 7550
- Joined: 3 Sep 2012 16:24
- Location: Arizona, United States
by C-Horse » 5 Sep 2014 22:32
GWiens2001 wrote:C-Horse - the serrated pins do have a distinct feel to them. Once you get the feel, they are pretty fun to pick.
Gordon
Oh yeah, I find it quite enjoyable
" In the end it is only me my weapon and my trigger finger "
-
C-Horse
- Supporter

-
- Posts: 114
- Joined: 5 Aug 2014 2:31
- Location: Largo Florida
by phrygianradar » 6 Sep 2014 20:22
C-Horse wrote:So this came in the mail today new and I picked it in like 3 min. I am most certainly getting used to picking these locks American Lock 1100 Series ( Red )  
Sweet! I love picking American Locks, too! Well done, those can be tricky. 
-
phrygianradar
- Supporter

-
- Posts: 471
- Joined: 2 Feb 2013 0:57
- Location: San Diego, CA
by C-Horse » 6 Sep 2014 21:25
phrygianradar wrote:C-Horse wrote:So this came in the mail today new and I picked it in like 3 min. I am most certainly getting used to picking these locks American Lock 1100 Series ( Red )  
Sweet! I love picking American Locks, too! Well done, those can be tricky. 
I have picked this now 20 - 30 times tonight. Is there anyone out there with American or US lock willing to swap locks for a bit of a change up? 
" In the end it is only me my weapon and my trigger finger "
-
C-Horse
- Supporter

-
- Posts: 114
- Joined: 5 Aug 2014 2:31
- Location: Largo Florida
by phrygianradar » 7 Sep 2014 1:16
Well done, that is a great mile stone! It is one of my favorite feelings to pull a core out of one of those locks! Straight up addictive! 
-
phrygianradar
- Supporter

-
- Posts: 471
- Joined: 2 Feb 2013 0:57
- Location: San Diego, CA
Return to Locks
Who is online
Users browsing this forum: No registered users and 3 guests
|