Information about locks themselves. Questions, tips and lock diagram information should be posted here.
by grndslm » 8 Jun 2015 13:34
I've been looking for a weather-resistant padlock for over a year, and the concept of a brass padlock it's definitely never one that occurred to me. Does a brass padlock with steel shackle (even stainless steel) and all remaining parts being brass exist? Open to other ideas as well. Also, it does not need to be a super challenging pick. It needs to "just work" outside for the next 20 years without being oiled. 
GulfTech Air Conditioning & Heating Services for Gulfport, Biloxi, Mobile, Hattiesburg, Slidell, Daphne, Pascagoula, Fairhope, Gautier, Ocean Springs, Tillmans Corner, Bay St Louis, DIberville, Laurel, Bay Minette
-
grndslm
-
- Posts: 22
- Joined: 25 Feb 2012 14:56
-
by GWiens2001 » 8 Jun 2015 14:09
Get an Abloy padlock.
Gordon
Just when you finally think you have learned it all, that is when you learn that you don't know anything yet.
-

GWiens2001
- Site Admin
-
- Posts: 7550
- Joined: 3 Sep 2012 16:24
- Location: Arizona, United States
by Squelchtone » 8 Jun 2015 14:15
You have to give us some more details, there are just too many padlocks to choose from.
Is this for your back yard tool shed with 1/4 inch plywood doors and a little hasp, or is this for a logging trail in the woods where the lock will be unattended for months at a time and possibly attached by hunters, trespassers, or thieves trying to steal construction equipment? ABUS makes 55/40 all brass marine grade padlocks, and Abloy makes high security locks with mechanisms that are very good in the wet and cold outdoors and are chrome plated to be very weather resistant. What is your budget for this padlock? $15 bucks or $115?
Thanks, Squelchtone
and GW beat me to it... looks like great minds think alike. or fools stick together? something like that.
-

Squelchtone
- Site Admin
-
- Posts: 11307
- Joined: 11 May 2006 0:41
- Location: right behind you.
by grndslm » 8 Jun 2015 20:13
The lock is for a .... locker, which will be holding tools. The locker is outside, near a saltwater, marine environment. I never thought that salt evaporated, but I was reading about how oak and magnolia leaves have a waxy coating to protect them from saltwater environments. Think I'd read that on Wikipedia, so probly better than a 50-50 chance that it's true. I'd like a few rust-proof padlocks, tho. I've replaced at least two of them this year alone, and who knows how many bicycle locks I've thrown away in my lifetime.... so $15 locks sound better to me than $115 ones. I was kinda hoping for a vintage brass lock that that was available on ebay in plentiful quantities. Kinda like vintage Gillette double-edge razors.  FWIW, I'm in the U.S., so hopefully the recommendations aren't only shipping from Australia or somewhere crazy like that.
GulfTech Air Conditioning & Heating Services for Gulfport, Biloxi, Mobile, Hattiesburg, Slidell, Daphne, Pascagoula, Fairhope, Gautier, Ocean Springs, Tillmans Corner, Bay St Louis, DIberville, Laurel, Bay Minette
-
grndslm
-
- Posts: 22
- Joined: 25 Feb 2012 14:56
-
by grndslm » 8 Jun 2015 20:32
This looks like a pretty good solution, tho, I've never seen the brand name mentioned before... Toledo Fine Locks, Brass Keyed Padlock (4-Pack) -- http://www.homedepot.com/p/Toledo-Fine- ... 530828-_-NIt's brass with stainless shackle.
GulfTech Air Conditioning & Heating Services for Gulfport, Biloxi, Mobile, Hattiesburg, Slidell, Daphne, Pascagoula, Fairhope, Gautier, Ocean Springs, Tillmans Corner, Bay St Louis, DIberville, Laurel, Bay Minette
-
grndslm
-
- Posts: 22
- Joined: 25 Feb 2012 14:56
-
by nick08037 » 8 Jun 2015 22:50
I think your other idea of a vintage brass lock from ebay would be more promising than this item as a low budget choice. In the end you may want to consider a premium quality padlock if you can get past the initial price. The Enforcer Abloy series padlocks may be a good value for you needs.
Quis custodiet ipsos custodes?
-

nick08037
-
- Posts: 146
- Joined: 26 Dec 2014 9:56
- Location: Southern New Jersey
by l0ckcr4ck3r » 9 Jun 2015 0:10
grndslm wrote:I never thought that salt evaporated, but I was reading about how oak and magnolia leaves have a waxy coating to protect them from saltwater environments. Think I'd read that on Wikipedia, so probly better than a 50-50 chance that it's true.
You were right the first time... Salt most definitely does NOT evaporate! else a solar still wouldn't work  Salt finds its way onto things like trees, near the coast, by being dissolved in water that is "atomized" basically as tiny droplets of liquid water that are small enough to be carried by the wind. The water droplets then land and the water then evaporates and leaves salt crystals behind. Just buy a brass bodied lock with a stainless shackle. sure the ball bearings and spring might rust over time but you will have to pay a lot of money to get the internals made of stuff that also resists salt water. You can buy an American 5570 series with Stainless Shackle and stainless Pins.. its just finding a lockie who can supply this.
-

l0ckcr4ck3r
-
- Posts: 293
- Joined: 6 May 2013 0:41
- Location: NC, USA
by Squelchtone » 9 Jun 2015 1:16
Check out this other thread (Re: Padlock for Toolboxes (UAE, Saltwater/Sand) https://www.lockpicking101.com/viewtopic.php?f=37&t=59601 it is also from someone looking to secure a tool chest in a marine environment and also wanting to use inexpensive/affortable padlocks. hope it helps, Squelchtone
-

Squelchtone
- Site Admin
-
- Posts: 11307
- Joined: 11 May 2006 0:41
- Location: right behind you.
by tomasfuk » 9 Jun 2015 4:24
grndslm wrote:I never thought that salt evaporated...
You can make an experiment to see what salt can do. Take 70 ml of hot pure water (boil it), put 30 g of salt (NaCl) in it and let it dissolve. Pour the solution into a 200 ml glass (you can add some salt to it) and cover the glass with some cap. A dessert plate will do. After few days you will see a ring of fine salt crystals on the glass above the water level.
Veni, vidi, relinquo. Vale!
-
tomasfuk
-
- Posts: 207
- Joined: 19 Apr 2015 2:35
by MatrixBlackRock » 9 Jun 2015 6:19
grndslm wrote:Does a brass padlock with steel shackle (even stainless steel) and all remaining parts being brass exist?
I use these on communications sites a few being almost on the ocean here in South Florida and find they hold up very well to a adverse environment. They are a bit pricey but if you shop around you can get them for as low as $15. The majority are plated brass housings, but keep in mind Best does offer aluminum housings and you don't want one of those. http://www.ebay.com/itm/Best-Access-Pad ... 23528484daWayne
-
MatrixBlackRock
-
- Posts: 265
- Joined: 25 Mar 2015 8:43
by l0ckcr4ck3r » 9 Jun 2015 12:12
Just thought about CLC!! Comando Lock has a dedicated Marine Padlock series with Stainless Ball Bearings and a choice of Brass or Boron Alloy Shackles. They are pretty good prices as well.
-

l0ckcr4ck3r
-
- Posts: 293
- Joined: 6 May 2013 0:41
- Location: NC, USA
by cledry » 9 Jun 2015 18:25
Abloy all the way. If you cannot afford it look for Wilson Bohanon, not as secure though.
Jim
-

cledry
-
- Posts: 2836
- Joined: 7 Mar 2009 23:29
- Location: Orlando
-
by romit » 19 Jun 2015 12:32
ABUS Marine Padlocks are 100 percent rust-free security padlocks and they are specially designed for outdoor use. ABUS padlock brass 70 & 70IB is made from solid brass and is completely rust free lock. In addition, ABLOY super weatherproof padlock also create locks that can handle any weather situation, from hot to cold weathers. They are also rust free padlocks.
-
romit
- BANNED!
-
- Posts: 5
- Joined: 31 Mar 2015 12:51
Return to Locks
Who is online
Users browsing this forum: No registered users and 13 guests
|