Having read the FAQ's you are still unfulfilled and seek more enlightenment, so post your general lock picking questions here.
Forum rules
Do not post safe related questions in this sub forum! Post them in This Old Safe
The sub forum you are currently in is for asking Beginner Hobby Lock Picking questions only.
by LPEnthusiast » 3 Feb 2016 22:53
Hi LP101 community, I'm looking at upgrading my current lock picking set and have noticed a few picks that I'm not really sure how to name. Is there a specific name for each of these?  Thanks for any help. Seems to be a lot of knowledge on this forum.
-
LPEnthusiast
-
- Posts: 2
- Joined: 16 Jan 2016 16:06
by Squelchtone » 4 Feb 2016 9:07
Don't do it bro, don't buy those weird Chinese picks!
They don't have names because we don't use them, they're odd ducks that someone designed in China thinking they look good/cool/useful.
If i had to name them, I'd basically say they're lifter picks. The 3rd one from the left looks like a normal sized hook, but it looks rounded instead of having a flat working surface..
What country are you in and what is your budget for buying a pick set? We can probably recommend much better options.
Squelchtone
-

Squelchtone
- Site Admin
-
- Posts: 11307
- Joined: 11 May 2006 0:41
- Location: right behind you.
by jimu57 » 4 Feb 2016 12:12
KLOM calls them pin lifters.
jimu57
"You haven't failed until you stop trying"
-
jimu57
- Supporter

-
- Posts: 526
- Joined: 24 Apr 2015 5:43
- Location: Virginia, USA
by MBI » 4 Feb 2016 15:10
I'd call them weird hooks.
First and third aren't quite as bad as the other two, but the second and fourth are going to bend easily, especially in the hands of a new picker.
-
MBI
- Moderator Emeritus
-
- Posts: 1346
- Joined: 9 Oct 2007 2:29
- Location: Utah, USA
-
by LPEnthusiast » 4 Feb 2016 15:27
Cool, thanks for the insight guys.
I hadn't heard of lifter picks before.
Squelch, thanks for the heads up. I'm in the US. I have a Southord and Sparrows set, so I'm looking at trying some other brands.
Any recommendations?
-
LPEnthusiast
-
- Posts: 2
- Joined: 16 Jan 2016 16:06
by kwoswalt99- » 4 Feb 2016 15:37
LPEnthusiast wrote:Cool, thanks for the insight guys.
I hadn't heard of lifter picks before.
Squelch, thanks for the heads up. I'm in the US. I have a Southord and Sparrows set, so I'm looking at trying some other brands.
Any recommendations?
Why not Peterson? They're part of the "big 3", so to speak, in the world of lockpicking.
-
kwoswalt99-
-
- Posts: 1218
- Joined: 17 Mar 2015 15:35
- Location: Somewhere.
by QuantumEntangled » 9 Feb 2016 21:10
I really like my Peterson g-20-5 set. I'll be the 1st to admit that it's pricey but you get good variety. 11 rubber handled picks including hooks, a couple rakes, a "gem" hook, an extractor etc. You get thin .015 inch plastic handle "slender" picks, both prybars, picks to help you work with stubborn bitting and a couple other goodies all wrapped up in a really nice leather case. At first you may use only three or maybe four tools at most. As you get better, you will start to use more of them. They last and work well.
-
QuantumEntangled
-
- Posts: 34
- Joined: 3 Feb 2016 20:05
by jimu57 » 9 Feb 2016 21:33
I bought 1 actually set. It was Southord with a small zipper case. Not sure which set it was. But I found out that I was using a very few different picks. Now I buy them from Peterson and buy 3 or 4 at a time, especially the Gem's and hooks. I use their Bogies. Have broken 2 but usually keep an extra. I probably use 3 rakes and 3 picks total. Along with that I make my own tension wrenches. I even make my own TOK that works like the Peterson pry bar. I doubt I will ever buy a complete set again. Just buy individual picks as I need to.
jim
jimu57
"You haven't failed until you stop trying"
-
jimu57
- Supporter

-
- Posts: 526
- Joined: 24 Apr 2015 5:43
- Location: Virginia, USA
by QuantumEntangled » 9 Feb 2016 22:33
You know Jim, I would love to try Peterson's bogota versions especially the .018 in... rubber handles would be amazing but plastic handles are no slouch either. I bet they would be a nice addition and actually come in handy for locks I practice on
-
QuantumEntangled
-
- Posts: 34
- Joined: 3 Feb 2016 20:05
Return to Got Questions? - Ask Beginner Hobby Lockpicking Questions Here
Who is online
Users browsing this forum: No registered users and 23 guests
|