Alternative Blanks for Ilco 1646

[MemeMagic]

I need to have some keys made, but they need to be brass finished.

This is the original form: https://hdsupplysolutions.com/shop/p/na ... 50-p885550 , but I cannot find all brass blanks anywhere.

Does anyone know if:
- https://hdsupplysolutions.com/shop/Prod ... reId=10051
or
- https://www.mscdirect.com/webapp/wcs/st ... s/74418724

Can accept the same keying. Thanks.

[RedE]

There are OEM brass keyblanks available on eBay. The seller I found is asking $7.50 for two keys.
Here's the link: http://www.ebay.com/itm/322135891867?redirect=mobile

[jimu57]

37 cents from CLKSUPPLIES.com

[jimu57]

Called CLK. Only have plated in stock. Depending on how many you want, they can order for you.

[billdeserthills]

Just a bit of a tip,
Those silver-colored key blanks you already have are actually all brass, underneath the plating
you can actually rub off the silver with a brush, might wanna mount that brush to a bench grinder
so it doesn't take two days though...

[RedE]

I see that mrlock.com has ESP NA16 blanks for $0.50 ea + $9.95 S/H. If you need several keys and aren't able to remove the nickel plating like Bill suggested, you might consider ordering from them. The shipping charges though... expensive!

[ltdbjd]

I'd check with Key Craze. https://www.keycraze.com. I order all my keys from them. They don't list the finish. The downside is you need to order a minimum of 10, but they are .45 cents each.

[jimu57]

How many do you need?

[cledry]

ESP or original CompX National blanks will be un-plated. I always keep 50 of the CompX ones in stock.