Forgot how to dial the combination on that old safe? Think you got the right numbers but the handle is stuck? What safe should you buy? Ask your safe questions here!
Forum rules
You are posting this in This Old Safe, a public area of the forum.
Safe manipulation discussion is allowed, but safe drilling or other destructive entry is only allowed in the Advanced - Safes and Safe Locks area.
If you are a guest of the forum and have a safe you need to open, but you do not have the combination, we cannot tell you how or where to drill it.
by nekobash » 22 Feb 2017 20:24
Hello, I'm a new member and first time poster. I apologize if I'm posting in the wrong board, but i found an old safe in my father's closet and I'm not exactly sure where to start in getting it open. He lost the combination, so I'm going to try to figure it out on my own. I'm lost here because I know nothing about it. I was just wondering if anyone could help get started by identifying what model it is. Any assistance would be greatly appreciated.   
-
nekobash
-
- Posts: 1
- Joined: 22 Feb 2017 19:53
by GWiens2001 » 22 Feb 2017 22:49
While we can not help you open the safe, since we do not give safe opening information outside the advanced forums.
Not familiar with the actual model number of that Sentry Safe. (snicker, snicker. It always cracks me up to use "Sentry" and "Safe" in the same sentence). But it dials open exactly like a school locker.
If anybody else answers, please limit responses to dialing instructions and model numbers.
Thank you,
Gordon - moderator
Just when you finally think you have learned it all, that is when you learn that you don't know anything yet.
-

GWiens2001
- Site Admin
-
- Posts: 7550
- Joined: 3 Sep 2012 16:24
- Location: Arizona, United States
by billdeserthills » 23 Feb 2017 0:49
GWiens2001 wrote:While we can not help you open the safe, since we do not give safe opening information outside the advanced forums.
Not familiar with the actual model number of that Sentry Safe. (snicker, snicker. It always cracks me up to use "Sentry" and "Safe" in the same sentence). But it dials open exactly like a school locker.
If anybody else answers, please limit responses to dialing instructions and model numbers.
Thank you,
Gordon - moderator
Sentry isn't much of a safe, but at least this model has a steel body, instead of plastic If you were in my area I could call the factory and get the combo it left with for $35 Then you still have a working safe. I would need to take down your ID, just so there's no funny business Maybe a call to your local locksmith?
-
billdeserthills
-
- Posts: 3827
- Joined: 19 Mar 2014 21:11
- Location: Arizona
by Ralph_Goodman » 23 Feb 2017 12:15
From the look of the side of the device (how the door is hinged), it seems like a lockbox rather than a safe.
The difference is the strength of the steel being used. (Very thin.)
Looks very insecure.
Would not recommend using it after you get it open.
-
Ralph_Goodman
-
- Posts: 255
- Joined: 2 Oct 2015 12:25
-
by bitbuster » 23 Feb 2017 12:29
You have a non-bouncing latch bolt in the safe. This means the 'bouncing' method will not open the safe. It is a straight tailpiece latch bolt. SENTRY SAFE--SENTRY SAFE--SENTRY SAFE. I said it Gordon.
"I dream of a world where, chickens can cross the road without having their motives questioned". Ralph Waldo Emerson
-
bitbuster
-
- Posts: 329
- Joined: 6 Aug 2009 14:46
- Location: NW Wis
by billdeserthills » 23 Feb 2017 16:11
Ralph_Goodman wrote:From the look of the side of the device (how the door is hinged), it seems like a lockbox rather than a safe.
The difference is the strength of the steel being used. (Very thin.)
Looks very insecure.
Would not recommend using it after you get it open.
Actually I have this same model safe, and there is nothing wrong with using a Sentry safe, for the thing it was made for-- which is storing important papers that you don't want to lose in case of fire I like to put my Sentry safe into a big heavy steel C-rated safe that way crooks will stay out of my papers too
-
billdeserthills
-
- Posts: 3827
- Joined: 19 Mar 2014 21:11
- Location: Arizona
by MartinHewitt » 25 Feb 2017 12:17
billdeserthills wrote:there is nothing wrong with using a Sentry safe, for the thing it was made for-- which is storing important papers that you don't want to lose in case of fire
You are probably right, but my impression from over the ocean is that a lot of people do no know that and expect also burglary protection. Martin Hewitt
-
MartinHewitt
-
- Posts: 922
- Joined: 16 Nov 2016 18:11
by billdeserthills » 25 Feb 2017 17:18
MartinHewitt wrote:billdeserthills wrote:there is nothing wrong with using a Sentry safe, for the thing it was made for-- which is storing important papers that you don't want to lose in case of fire
You are probably right, but my impression from over the ocean is that a lot of people do no know that and expect also burglary protection. Martin Hewitt
In that case a BF (Burglary/Fire) rated safe is what those people need AMSEC makes some nice ones, I've tried out several of them, only problem I had is when the delivery driver doesn't bother securing the safe upright in the truck--I have received two that fell over on their doors--Not a pretty sight
-
billdeserthills
-
- Posts: 3827
- Joined: 19 Mar 2014 21:11
- Location: Arizona
by MartinHewitt » 26 Feb 2017 7:23
billdeserthills wrote:MartinHewitt wrote:billdeserthills wrote:there is nothing wrong with using a Sentry safe, for the thing it was made for-- which is storing important papers that you don't want to lose in case of fire
You are probably right, but my impression from over the ocean is that a lot of people do no know that and expect also burglary protection.
In that case a BF (Burglary/Fire) rated safe is what those people need
Ok, I think my statement was not complete enough to be understandable. It should have been: "... my impression from over the ocean is that a lot of people do no know that a Sentry safe is just a fire safe and expect also burglary protection from a Sentry safe." At least they expect more than the very basic burglary protection. We had in one of our offices a break-in and a fire safe. The burglar was armed with the mandatory screwdriver. He didn't try to open the safe and my guess is that he would not have succeeded with a screwdriver. He left with about 50 Euro from an unlocked cash box.
-
MartinHewitt
-
- Posts: 922
- Joined: 16 Nov 2016 18:11
Return to This Old Safe
Who is online
Users browsing this forum: No registered users and 5 guests
|