Having read the FAQ's you are still unfulfilled and seek more enlightenment, so post your general lock picking questions here.
Forum rules
Do not post safe related questions in this sub forum! Post them in This Old Safe
The sub forum you are currently in is for asking Beginner Hobby Lock Picking questions only.
by jbearnolimits » 14 Feb 2022 18:31
Just curious... I have an old padlock and the tumbler rotates freely to the right 90 degrees and back to the left 90 degrees. I don't feel any pins in it. I have no key. Is it still possible to pick it or is it just a dead lock?
-
jbearnolimits
-
- Posts: 30
- Joined: 10 Dec 2021 18:15
by GWiens2001 » 14 Feb 2022 19:07
If the plug turns and it does not open, then it is shot.
Gordon
Just when you finally think you have learned it all, that is when you learn that you don't know anything yet.
-

GWiens2001
- Site Admin
-
- Posts: 7550
- Joined: 3 Sep 2012 16:24
- Location: Arizona, United States
by YouLuckyFox » 14 Feb 2022 19:53
I don't think I've heard of this. How would all the pins leave the lock without it being installed without the pins and tailpiece/cam?
-
YouLuckyFox
-
- Posts: 630
- Joined: 10 Aug 2012 19:25
by jbearnolimits » 14 Feb 2022 19:55
GWiens2001 wrote:If the plug turns and it does not open, then it is shot.
Gordon
Ah yes, I forgot it is called the plug.
-
jbearnolimits
-
- Posts: 30
- Joined: 10 Dec 2021 18:15
by GWiens2001 » 14 Feb 2022 22:51
YouLuckyFox wrote:I don't think I've heard of this. How would all the pins leave the lock without it being installed without the pins and tailpiece/cam?
I've seen locks with damaged pins stuck at the shear line, or if the lock could be disassembled, the pins removed. But not releasing the shackle even if the plug is turned speaks of other problems. Gordon
Just when you finally think you have learned it all, that is when you learn that you don't know anything yet.
-

GWiens2001
- Site Admin
-
- Posts: 7550
- Joined: 3 Sep 2012 16:24
- Location: Arizona, United States
by femurat » 15 Feb 2022 0:32
Based on your description, it may be a cheap disk detainer padlock. Yes, you can pick it, but need different tools. Can you post a picture of the keyway, so I check my theory? Cheers 
-

femurat
- Site Admin
-
- Posts: 3745
- Joined: 22 Sep 2008 9:06
- Location: Italy
by GWiens2001 » 15 Feb 2022 10:49
Good thinking, Femurat. Same thing would happen with a warded padlock.
Gordon
Just when you finally think you have learned it all, that is when you learn that you don't know anything yet.
-

GWiens2001
- Site Admin
-
- Posts: 7550
- Joined: 3 Sep 2012 16:24
- Location: Arizona, United States
by GWiens2001 » 15 Feb 2022 22:07
Single sided warded padlock. It does not have tumblers or discs. It has a trip wire that locks the shackle.
Either use a warded pick set or get a flat piece of metal and impression a key for the lock.
So the lock is not broken! At least it does not have broken or missing tumblers.
Gordon
Just when you finally think you have learned it all, that is when you learn that you don't know anything yet.
-

GWiens2001
- Site Admin
-
- Posts: 7550
- Joined: 3 Sep 2012 16:24
- Location: Arizona, United States
by jbearnolimits » 15 Feb 2022 23:09
GWiens2001 wrote:Single sided warded padlock. It does not have tumblers or discs. It has a trip wire that locks the shackle.
Either use a warded pick set or get a flat piece of metal and impression a key for the lock.
So the lock is not broken! At least it does not have broken or missing tumblers.
Gordon
OOOHHHH, I thought it may be a warded lock from the way it looked but wasn't sure. I've heard a little about this kind of lock but never encountered it. Guess this is my introduction. Thanks!
-
jbearnolimits
-
- Posts: 30
- Joined: 10 Dec 2021 18:15
by YouLuckyFox » 15 Feb 2022 23:41
That was my guess, warded padlock. Not asking for credit just glad it makes sense. I was confused for a bit how a padlock could be in this situation unless it was a warded padlock. Good point on disc detainer, too.
-
YouLuckyFox
-
- Posts: 630
- Joined: 10 Aug 2012 19:25
by jbearnolimits » 16 Feb 2022 0:45
Curious, in the wild if the information on make and model is worn off how would you know it is a warded lock? Obviously I know now that the plug will turn and it won't have pins...but is there any other indicators?
-
jbearnolimits
-
- Posts: 30
- Joined: 10 Dec 2021 18:15
by GWiens2001 » 16 Feb 2022 13:54
It actually does not have a plug. All it has is the keyway cover spinner. Some of the types of warded locks you just learn from experience. Google warded padlocks.
Gordon
Just when you finally think you have learned it all, that is when you learn that you don't know anything yet.
-

GWiens2001
- Site Admin
-
- Posts: 7550
- Joined: 3 Sep 2012 16:24
- Location: Arizona, United States
Return to Got Questions? - Ask Beginner Hobby Lockpicking Questions Here
Who is online
Users browsing this forum: No registered users and 21 guests
|