SFIC with a Schlage C keyway?

[GWiens2001]

Capping you might just have to use a standard capping block and just reset the core to set each cap one by one.

Nope. It uses a strip to cap all the barrels with one strip. You press down the spring, slide the strip over it, move to the next one and repeat. You push in the strip by hand. Once the strip is fully inserted and the keys are tested, you a tool in the pinning kit that looks to me like an automatic center punch on each end of the strip to keep it from backing out.

They have a video of the process on their website.

Gordon

[RedStagKiller]

Capping you might just have to use a standard capping block and just reset the core to set each cap one by one.

Nope. It uses a strip to cap all the barrels with one strip. You press down the spring, slide the strip over it, move to the next one and repeat. You push in the strip by hand. Once the strip is fully inserted and the keys are tested, you a tool in the pinning kit that looks to me like an automatic center punch on each end of the strip to keep it from backing out.

They have a video of the process on their website.

Gordon

Oh, Thanks, I watched the video but it was a bit back and I forgot that part. Do you think a Falcon cap strip would work? The core looks the same.

[Offroad designer]

Thanks for the update and help. Is there a SFIC that will take an Everest C120 key? if I could find that it would solve my problem. Trying to key KS41 Schlage pad lock

The C123 Keyways works on This SFIC. I tried it with Schlage's key and it works seamlessly key sharing with my LFIC padlocks.


[image][/image]

[GWiens2001]

Thanks for the update and help. Is there a SFIC that will take an Everest C120 key? if I could find that it would solve my problem. Trying to key KS41 Schlage pad lock

The C123 Keyways works on This SFIC. I tried it with Schlage's key and it works seamlessly key sharing with my LFIC padlocks.


[image][/image]

They have a small number of Schlage sections they make. Unfortunately, the last time I checked, they still did not have refills available for the pinning kit. Just pinned up one of the SC4 cores this week and put it into an American SFIC padlock to put on display at work.

Gordon

[demux]

Hmm, I learned something useful today. I knew you could get Everest SFICs but thought they only came in the B keyway series, which is restricted. Didn't know they had them in C keyways as well. That's good to know...

[GWiens2001]

Hmm, I learned something useful today. I knew you could get Everest SFICs but thought they only came in the B keyway series, which is restricted. Didn't know they had them in C keyways as well. That's good to know...

Schlage does not make these SFIC cores in this topic.

Gordon