Hard locks?

[Redbull83]

Ok, I'll check it out.

[Hollywood]

Hey Redbull83,

First I wanted to say I hope you don't think I was trying to take over your post.......

I am having the same issue myself and I didn't want to open a new thread about it...

and Hopefully we can work this out like a team and Conquer this BadBoy........

I've looked through several posts and it says to use the Lightest tension that you can and when you feel a slight bit of drag loosen up a bit but then quickly reapply pressure again........

So far i've tried everything in my arsenal to conquer this Beast from Feather Wrench,, to Majestic, Peterson, Hpc, Southord, Homemade LMAO


But this is The Most Difficult lock I have tried soo far soo I'm up for it and IT WILL NOT GET THE BEST OF ME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.


yet.
..
.
.
.

[Redbull83]

Lol, I didn't think you were taking over the thread, man.

Last night I spent a good two hours on it. Like what happens is I can get the plug to turn like 20 degrees, and all the pins feel like they're set. I've tried using light tension, but hasn't worked.

I looked over the MIT guide, and I think I have a better understanding of the mushroom pins. Well, I guess I should go try some more...

[skold]

To tell if the # 6 pin is a pin or not, you look on the face for 2 retaining pins, if there are 2 and 6 on top that means it is a six pin, if there is one it is a 5 pin.

[Redbull83]

Here they are.

[Hollywood]

Last night I spent a good two hours on it. Like what happens is I can get the plug to turn like 20 degrees, and all the pins feel like they're set. I've tried using light tension, but hasn't worked.

...

Well I'm having the Exact same issue with it as-well.
tried every pick I have along with Computer Picks.
But I will not give in and "Chop it UP"

[Hollywood]

Well I did what i said I wouldn't do.......

it pissed me off soo much I locked it in the Vise and took the grinder to it.

Turns out that there were 4 Spool Pins & 1 False pin

I have another so I'm gonna keep trying.

[nate the grate]

IT seems to me on the uhaul locks that i have tried that i cant seem to create a binding effect on the pins no matter how much presure i apply the only way to open them is raking and boucing and raking the pins quickly not very pro and sometimes it takes forever. I think a ground down blank and a saftey pin would be quicker lol

[nate the grate]

the uhaul locks that I speak of are a round stainless steel lock

[nate the grate]

IT seems to me on the uhaul locks that i have tried that i cant seem to create a binding effect on the pins no matter how much presure i apply the only way to open them is raking and boucing and raking the pins quickly not very pro and sometimes it takes forever. I think a ground down blank and a saftey pin would be quicker lol

[Jason13]

i think te 1st pin to bind on my lock is a muhroom case it took hours to get it.

[illusion]

thread hijack perhaps jason?