Having read the FAQ's you are still unfulfilled and seek more enlightenment, so post your general lock picking questions here.
Forum rules
Do not post safe related questions in this sub forum! Post them in This Old Safe
The sub forum you are currently in is for asking Beginner Hobby Lock Picking questions only.
by spider » 11 Aug 2005 14:03
a few years ago i used to be able to pick locks with a pick. but after years of travelling and getting back into locks again i started of using a rake. Now when i use a pick to try and open a lock that i can rake open i can't do it. Even though i know what i should be doing with the pick i can't do it.
I know at the end of the day we all want to get that lock open, but it would be nice to pick it.
As i have read somewhere on 101 before don't get used to raking open a lock.
Anyone been in the same situation, where they have come back to lockicking and finding it difficult.
-
spider
-
- Posts: 27
- Joined: 25 Dec 2004 8:30
- Location: Jersey
by SFGOON » 11 Aug 2005 14:39
Stop raking, get in a good, patient state of mind, grab a lock and pick it as slowly as you can. Raking is a hasty technique that can sometimes reward frustration. Pin by pin picking WILL be faster once you get good at it, but first you have to learn control and patience.
"Reverse the obvious and the truth will present itself." - Carl Jung
-
SFGOON
- Admin Emeritus
-
- Posts: 2160
- Joined: 9 Sep 2004 14:04
- Location: Puget Sound, WA
by Eyes_Only » 11 Aug 2005 15:24
Varying the amount of tension and keeping it light always works for me. But SFGOON is right, if it's been a while since you've been picking on a regular basis its a good idea to get familiar with the very basics to at least get your finger tips used to it again.
If a lock is a puzzle, then its key is the complete picture
-
Eyes_Only
- Supporter

-
- Posts: 4111
- Joined: 17 Dec 2003 20:33
by helix » 11 Aug 2005 20:56
....and go send tour rakes to a friend in another city for a
couple of months. Just keep the hook(s) and like the others say,
pick it as slow as you can.
-
helix
-
- Posts: 689
- Joined: 28 May 2005 8:10
- Location: Perth, Australia.
by cracksman » 11 Aug 2005 21:20
Be honest with yourself, I just spent 20 minutes picking a Kwikset I set up with 3 security pins  I simply lost the touch for the lock, and thought my skills were better than they are. Once I re-aquainted myself with it, it was easy. The re-learning time is so much quicker then the original. Give it 2 weeks at an hour a day and you'll probably be better than you have ever been  If not, well maybe you just suck  In either case I would like to know how you progress so keep us informed 
-
cracksman
-
- Posts: 614
- Joined: 8 May 2005 19:37
- Location: Massachusetts, USA
by spider » 12 Aug 2005 7:22
Thanks everyone, will practice, promise
-
spider
-
- Posts: 27
- Joined: 25 Dec 2004 8:30
- Location: Jersey
by jamesphilhulk2 » 12 Aug 2005 7:32
1) is a rake better than normal picks?
2) is there any point in me buying a pick set when i can just geta rake?
-
jamesphilhulk2
-
- Posts: 528
- Joined: 5 Jul 2005 4:37
- Location: S.Wales, uk
by raimundo » 12 Aug 2005 10:02
Assuming that your goal is to open the lock, and that the lock is a known type that you expect to be able to pick, the fastest method is to rake for about a minute, then take the rake out, without removing tension, and feel it out with a pick.
Some locks are resistant to raking and for them, its picking that will get you through, but a lot of locks will just rake open so why make it take any longer. 
-
raimundo
-
- Posts: 7130
- Joined: 21 Apr 2004 9:02
- Location: Minnneapolis
by sublime progie » 12 Aug 2005 12:49
yes there is definatly a point in buying a feeler pick you always want to have a feeler pick.
-
sublime progie
-
- Posts: 377
- Joined: 7 May 2005 17:36
- Location: Thompson Falls, MT
by cracksman » 12 Aug 2005 23:40
I'm not trying to be a wise-a s s here, but what is the difference between a regular pick and a feeler? I use my favorite pick because, for the lack of a better word it is a "feeler", I use it to read each pin. I am honestly curious...
-
cracksman
-
- Posts: 614
- Joined: 8 May 2005 19:37
- Location: Massachusetts, USA
by Chrispy » 12 Aug 2005 23:59
A feeler is basically a shallow hook. The curve is probably about 20 degrees compared to a deeper hook of 60-75 degrees. It is used to 'feel' the pins rather than traditionally pick them. Which I suppose is why the diamond pick is more often associated with lockpicking. I use a half-round feeler to pick almost all the locks I come across, it is probably about 15-20 degrees curved. The SouthOrd set I have has a hook with a 80-90 degree curve which I have ground down a bit (had two of them anyway  )
Some things may be pick proof, but everything can be bypassed....
-
Chrispy
-
- Posts: 3569
- Joined: 24 Mar 2005 15:49
- Location: GC, QLD
-
by vector40 » 12 Aug 2005 23:59
"Feeler" usually just means a hook pick or anything used to "feel" and pick individual pins.
There are also straight picks without any head, sometimes called "probes," which you can use to count pins or just poke around... but feeler usually means a hook.
-
vector40
-
- Posts: 2335
- Joined: 7 Feb 2005 3:12
- Location: Santa Cruz, CA
by cracksman » 13 Aug 2005 0:24
Yeah, one side of one of my picks is a "probe", I usually use it for "ghetto-repinning", when you don't have the proper stuff  In fact Chrispy, I think you have one of those locks now, #002 if I remember correctly  I was pretty sure you guys were using a small hook or diamond, thanks for clearing that up. It is kind of like talking to a person for an hour and forgetting their name, you don't want to ask because you should know it but you don't and you don't know how to bring it up, so I just asked 
-
cracksman
-
- Posts: 614
- Joined: 8 May 2005 19:37
- Location: Massachusetts, USA
Return to Got Questions? - Ask Beginner Hobby Lockpicking Questions Here
Who is online
Users browsing this forum: No registered users and 13 guests
|