Picked all the easy locks and want to step up your game? Further your lock picking techniques, exchange pro tips, videos, lessons, and develop your skills here.
by BobbypinsPlease » 2 Aug 2005 8:07
Hope I'm not asking about something covered in an old thread. Did a search but couldn't find anything.
Okay so I'm working on my first lock. It's just a basic Master combo lock that I found abandoned on my buildings bike rack. What I'm trying to do is pick the itty bitty keyhole on the back. I've managed to set at least 2 pins, but after that I can't find anymore. So, my question is how many pins am I looking for here? And, will this even open the lock up?
Thanks for any help.
-
BobbypinsPlease
-
- Posts: 3
- Joined: 2 Aug 2005 7:51
- Location: Grand Forks, ND
by BobbypinsPlease » 2 Aug 2005 8:33
Wow, please excuse the stupid noob question. Just raked the pins and heard 4 clicks. However, if anyone has experience with this type of lock any tips would still be welcome.
-
BobbypinsPlease
-
- Posts: 3
- Joined: 2 Aug 2005 7:51
- Location: Grand Forks, ND
by Santos718 » 2 Aug 2005 9:21
Even though you alread have this lock and are working on it. I still recommend an easier lock to start out with. i.e. Kwikset dead bolt. but to answer you question. I would have to go with really light tension, especially because its a small keyway.
MacBook Pro all the way!!!
-
Santos718
-
- Posts: 669
- Joined: 17 Jun 2005 21:46
- Location: Queens, NyC(Home), Berrien Springs, MI(School)
-
by BobbypinsPlease » 2 Aug 2005 10:07
Ahh, yer probably right. But then again I'm stubborn and broke so I'm gonna keep crackin at it.
-
BobbypinsPlease
-
- Posts: 3
- Joined: 2 Aug 2005 7:51
- Location: Grand Forks, ND
by geno » 2 Aug 2005 14:12
I recently posted about an american combo lock with a small keyhole in the back. I got it open with a sawtooth rake. I put a little tension on it while I jiggled/raked it. It was enough to open it pretty fast.
Keep on trying. You'll get it eventually.
-
geno
-
- Posts: 97
- Joined: 1 Jul 2005 13:24
- Location: Chicago
by anbujustin » 18 Jan 2006 22:35
I got this lock pretty easily but its kinda confusing at first.
First i used a snake pick and i picked it and it opened in a Clockwise rotation.
I apply really light tension and jiggled the shackle part or that part that comes up and down as i lightly scrubbed the tips of the pins. It should open much easier this way cus the scrubbing and the jiggling for some reason opened most masters in seconds.
I hope this helps u
-justin
-
anbujustin
-
- Posts: 18
- Joined: 29 Dec 2005 5:00
- Location: Illinois
by hot04wrx » 19 Jan 2006 17:07
What direction are you trying the tension (clockwise or counter)? When I got my first set of picks, I want to say that it was counter when I tried on the same kind of lock but I might be wrong. Master Lock Co. put that key hole there so school administrators could easily get into unsuspecting kids lockers. Ill see if I can dig up one of my old ones and I will confirm.
P.S. No question is stupid unless meant to be.....
-
hot04wrx
-
- Posts: 4
- Joined: 5 Aug 2005 0:52
- Location: Schenectady, N.Y.
by pretender » 20 Jan 2006 14:45
Master combo lock I had used a 5 pin lock in the back. Have the split cylinder sitting here, it's pretty low tolerance garbage.
Had to modify one of my spare tension wrenches to pick it, but afterward it wasn't too difficult; really thin hook pick and some patience will get 'em.
-
pretender
-
- Posts: 116
- Joined: 4 Jan 2005 9:38
- Location: michigan
by Schema » 21 Jan 2006 14:07
If I can recall correctly they're 4-pins. BTW, alot of times those dual combo/key locks are sold in bulk having a master key to them, for schools, warehouses, hospitals and such. Back when I was in school they made every student get one, and all had the same serial code stamped on the back so they could have a master key to access all the lockers. With that in mind, I took my lock home and made a key for the lock (you can take a normal house key, flip it upside down, and file it to make a key blank for that lock) Then everytime I had to get in my locker, instead of spending a min with the combo, I could open it up in a snap. If I get my hands on another one, I'll post a DIY on it.
New information is processed according to how it fits into rules, called schema. This schema can be used to interpret and predict situations occurring in our environment.
-
Schema
-
- Posts: 5
- Joined: 15 Jan 2006 0:31
Return to Pick-Fu [Intermediate Skill Level]
Who is online
Users browsing this forum: No registered users and 1 guest
|