Having read the FAQ's you are still unfulfilled and seek more enlightenment, so post your general lock picking questions here.
Forum rules
Do not post safe related questions in this sub forum! Post them in This Old Safe
The sub forum you are currently in is for asking Beginner Hobby Lock Picking questions only.
by Ryzom » 9 Mar 2004 23:13
Alright, I got this abus diskus level 9 lock the one with spooled pins, and I can get it but it normally takes a while and it tends to chew up my hook pick, I reverse pick it but that still doesn't seem to speed things up. Am I missing something here?
-
Ryzom
-
- Posts: 28
- Joined: 10 Dec 2003 3:35
by Chucklz » 9 Mar 2004 23:16
Nope, spool pins can often take quite a while.
-
Chucklz
-
- Posts: 3097
- Joined: 4 Nov 2003 17:58
- Location: Philadelphia
by CitySpider » 9 Mar 2004 23:19
You're not missing something on the speed. I'm pretty impressed that you can pick them, actually. But if it's "chewing up" your hook pick, that might be a sign of a problem. I can't imagine why it'd be doing that.
-
CitySpider
-
- Posts: 595
- Joined: 21 Dec 2003 4:01
- Location: USA
by Ryzom » 9 Mar 2004 23:23
well i can tell you why  , i tend after a certain period of picking to get, not a sticky pin, but a stuck pin. And normally if i apply enough force to push that up the lock unlocks, however the force required to push it up is far far too much for my poor hook to take. I imagine it becomes stick cause its stuck between the plug and the chassi
-
Ryzom
-
- Posts: 28
- Joined: 10 Dec 2003 3:35
by Ryzom » 9 Mar 2004 23:24
p.s. releasing tension normally knocks all the pins down and I have to start over so i tend to try and avoid that whenever possible
-
Ryzom
-
- Posts: 28
- Joined: 10 Dec 2003 3:35
by CitySpider » 10 Mar 2004 3:05
Ryzom,
If it's that stuck, it sounds like you're using too much tension. Obviously you don't want to release it completely, then you'd have to start over, but you might want to try using just a little bit less.
Just a thought,
Spider
-
CitySpider
-
- Posts: 595
- Joined: 21 Dec 2003 4:01
- Location: USA
by Blitzkrieg » 10 Mar 2004 23:03
If you have to use that much force on your tension wrench to keep the set pins set, then maybe your setting the pins in the wrong direction. If your setting from back to front then try from front to back.
~Blitzkrieg~
-
Blitzkrieg
-
- Posts: 5
- Joined: 27 Jan 2004 2:29
- Location: Burnaby BC, Canada
by Chucklz » 10 Mar 2004 23:54
Also you may want to trick picking in the "wrong " direction then using a plug spinner. A squirt of a lubricant coulnt hurt either. Just a thought.
-
Chucklz
-
- Posts: 3097
- Joined: 4 Nov 2003 17:58
- Location: Philadelphia
by Ryzom » 11 Mar 2004 1:37
I don't think I am using too much tension, because I actually can release the tension entirely and still be unable to move the pin, thats what has me stumped, It shouldn't act that way.
And what would opening it the "wrong" way do? I am not sure it would turn that way because It won't even with a key, and the times I have picked things the wrong way (specifically doors) it has just caused a lot of trouble.
And lubricant being what exactly? I know WD40 will just gum up the lock, and I can't get my hands on any camping gas to clean em out.
-
Ryzom
-
- Posts: 28
- Joined: 10 Dec 2003 3:35
by Chucklz » 11 Mar 2004 10:38
White gas? nah, dont bother.
Go to a hardware store and find where they sell WD-40 products. There will be a can that says "3 in 1 professional" or something of a Spray silicone lubricant. Ive used that with good results. Tri-Flo is also recommended.
-
Chucklz
-
- Posts: 3097
- Joined: 4 Nov 2003 17:58
- Location: Philadelphia
Return to Got Questions? - Ask Beginner Hobby Lockpicking Questions Here
Who is online
Users browsing this forum: No registered users and 43 guests
|