Tool recommendations, information on your favorite automatic and/or mechanical lockpicking devices for those with less skills, or looking to make their own.
by puck » 21 Nov 2003 12:39
There may be references to this somewhere, but :
Does anyone know where to get plans/pictures for a homemade snap pick? I've heard bits and pieces about snap picks made with coat hangers and the like, but I've never seen a decent description or plans for one. Any help?
-
puck
-
- Posts: 14
- Joined: 17 Oct 2003 17:05
-
by Dark Angel » 2 Dec 2003 12:44
I have details and picture's of the coat hanger snap pick.
If you p.m me your email address then i will send you the details when i have time. 
-
Dark Angel
-
- Posts: 158
- Joined: 28 Nov 2003 16:15
- Location: London,uk
-
by Varjeal » 2 Dec 2003 13:00
If you have details and pics...post 'em in here and share with the rest of us. 
*insert witty comment here*
-
Varjeal
- Moderator Emeritus
-
- Posts: 2869
- Joined: 3 Oct 2003 15:05
- Location: Western Canada
by Dark Angel » 3 Dec 2003 14:20
The details and pictures i have are only scanned pages from one of my books.
I have not got a host otherwise i would post them here,still now that Pickmonger has done the honours,i am sure that people can work out how to construct one from the picture.
-
Dark Angel
-
- Posts: 158
- Joined: 28 Nov 2003 16:15
- Location: London,uk
-
by puck » 4 Dec 2003 23:02
Ok, though I risk sounding like a dumb  (dumb=noun) how exactly do I use the contraption once I make it?
-
puck
-
- Posts: 14
- Joined: 17 Oct 2003 17:05
-
by Varjeal » 5 Dec 2003 11:10
If you look at Dark Angel's sig line and see the way the pick gun is working, it'll help my explanation too.
In pickmonger's pic, once you've inserted the dark end into the lock and have your tension wrench in place, you can use your thumb to push down on the top portion just behind the black part. Releasing it, will cause the arm to "snap" upwards, and once it hits the top will vibrate, causing the pins to hop up and down. Correctly applying tension at this point will open the lock. If it doesn't...repeat. 
*insert witty comment here*
-
Varjeal
- Moderator Emeritus
-
- Posts: 2869
- Joined: 3 Oct 2003 15:05
- Location: Western Canada
by puck » 5 Dec 2003 11:21
Gotcha

-
puck
-
- Posts: 14
- Joined: 17 Oct 2003 17:05
-
by micronpc » 7 Feb 2004 21:29
hmmmm. does this tool really work? It slmost seems too easy
-
micronpc
-
- Posts: 5
- Joined: 25 Jan 2004 16:58
- Location: Ann Arbor. MI
by lockpickroy » 8 Feb 2004 2:06
Yes it works good and real easy to make from a long street cleaner bristle or a windshild wiper blade in fact i got rid of a store bought pick gun beacause i dont need it the clicker work just as good for me also found a way to make it have a stronger kick by adding a strip of street cleaner bristle on the inside of the handle makes it harder to push down and a stronger strike when released
Lock picking hobbyist turned licensed locksmith thanks in part to lp101.com
-
lockpickroy
- Supporter

-
- Posts: 184
- Joined: 14 Oct 2003 19:18
- Location: Bakersfield California
by micronpc » 8 Feb 2004 20:51
where can one buy or find said street cleaner bristles?
-
micronpc
-
- Posts: 5
- Joined: 25 Jan 2004 16:58
- Location: Ann Arbor. MI
by Chucklz » 8 Feb 2004 21:02
In the street. Look in shopping centers, and near curbs, especially on turns.
-
Chucklz
-
- Posts: 3097
- Joined: 4 Nov 2003 17:58
- Location: Philadelphia
by Sipe » 9 Feb 2004 14:14
im interested in making one now too
but where i live its winter and there is snow on the ground
any sugestions besides street cleaner bristels???
-
Sipe
-
- Posts: 31
- Joined: 7 Feb 2004 18:15
- Location: Canada
by PYRO1234321 » 9 Feb 2004 16:11
try a torch lighter and remove the sparker and striker. the spring wire has little bends perfect for your thumb, bending the wire may require heating depending on how thick it is. very powerful though so be careful not to damage locks. i posted on this before, so only a little 'snap' is required. you can grind part of the main wire flat, or attach a flat strip of other material like hack saw blade or even a big sewing needle and fixing it on with wraped wire. the stiffer the end material the better. good luck.
-
PYRO1234321
-
- Posts: 102
- Joined: 4 Dec 2003 19:01
- Location: CANADA
by First picker » 30 Mar 2004 19:50
I find that if you use a torch lighter, it often breaks the lock. If you use a coat hanger, that works well, and so does the street bristles. If you don't have a torque wrench, i use a straightened hairpin with a bend 3cm from the straight end. It works really well. heres a pic of a home made snapgun (courtesy of southord)

"I didn't do it, nobody saw me do it... you can't prove ANYTHING!"
-
First picker
-
- Posts: 3
- Joined: 11 Dec 2003 10:06
- Location: Alberta, Canada
Return to Lock Pick Guns, EPGs, Snappers
Who is online
Users browsing this forum: No registered users and 0 guests
|