Having read the FAQ's you are still unfulfilled and seek more enlightenment, so post your general lock picking questions here.
Forum rules
Do not post safe related questions in this sub forum! Post them in This Old Safe
The sub forum you are currently in is for asking Beginner Hobby Lock Picking questions only.
by TAMUmpower » 26 Aug 2006 23:00
Just like the title says. I'm done with security pins and want a sidebar to tackle. Any lock brand or model recommendations.....Medeco, ASSA, BEST?
Ultimatly I am working towards Biaxial Medicos, so I figure I need to start mastering sidebars.
-
TAMUmpower
-
- Posts: 18
- Joined: 18 May 2006 14:34
- Location: College Station, Texas
by What » 27 Aug 2006 0:10
if you are working twoards Medeco Biaxials, why not start with them.
remove all but 1 of the pins and get consitant, the move to 2 pins and so on.
-
What
-
- Posts: 948
- Joined: 9 Jan 2006 23:17
- Location: universe, solar system, earth, n. america, USA, california, orange county
by TAMUmpower » 27 Aug 2006 1:33
I had planned on that, and I probably will be trying a Biaxael before im ready but Im also looking for the next step up.
-
TAMUmpower
-
- Posts: 18
- Joined: 18 May 2006 14:34
- Location: College Station, Texas
by n2oah » 27 Aug 2006 1:43
Start with a non-biaxial Medeco without false notches on the sidebar axis if you want to pick a Medeco.
"Lockpicking is what robbing is all about!" says Jim King.
-
n2oah
-
- Posts: 3180
- Joined: 13 May 2005 22:03
- Location: Menomonie, WI, USA
-
by bpc293 » 27 Aug 2006 2:14
n2oah i'm not familar with medeco's model numbers and all there diffrent locks. what models should i look for to get a non biaxial.
thanks
-
bpc293
- BANNED!
-
- Posts: 1020
- Joined: 10 May 2006 0:09
- Location: new york usa
-
by n2oah » 27 Aug 2006 2:29
I'm not sure about the model numbers, but you can always look for the biaxial logo if you're in doubt.
"Lockpicking is what robbing is all about!" says Jim King.
-
n2oah
-
- Posts: 3180
- Joined: 13 May 2005 22:03
- Location: Menomonie, WI, USA
-
by dosman » 1 Sep 2006 2:04
I've got a Medeco electric switch lock with 3 pins and it's biaxial (aka sidebar). They do have ribs on the pins but aren't too severe. Don't confuse these with the regular cam locks, I think most of those are non-sidebar. The way I tell is to look at the keyway, the highly warded locks seem to all be biaxial while the more normal keyway is just a normal pin tumbler (But I could be off my rocker here). I have only spent a short time on mine so far with no results, once I make a tool to properly twist the pins I'll start getting serious again.
http://www.medeco.com/products/products_detail_section_i.php?category_ID=56§ion_ID=4&clear=1&
After looking closer they claim these have 5 pins so it would appear that there are several versions floating around in the wild. Mine are from an IBM RS/6000 cover lock (The older Microchannel systems).
-
dosman
-
- Posts: 166
- Joined: 18 Aug 2006 14:24
- Location: Bloomington, Indiana
-
by bpc293 » 1 Sep 2006 9:54
are those lock farly new. if they are there's a slim chance i'll get a used one. do you mind if i ask how much they cost. its a medeco so i couldn't even guess.
thanks
-
bpc293
- BANNED!
-
- Posts: 1020
- Joined: 10 May 2006 0:09
- Location: new york usa
-
by dosman » 1 Sep 2006 10:32
Mine where 10-15 year old unopened stock that I found in my junk room  . I had them for years and didn't know they where anything special until I found them again a few months ago.
Medeco's seem to be reasonably priced on ebay and they seem to pop-up on odd-ball equipment that sells for much less than just a bare Medeco lock. The 4-pin Medeco payphone lock that I posted pictures of was about $15. (It apprears they just removed that post for some reason).
-
dosman
-
- Posts: 166
- Joined: 18 Aug 2006 14:24
- Location: Bloomington, Indiana
-
by bpc293 » 1 Sep 2006 21:12
thanks
-
bpc293
- BANNED!
-
- Posts: 1020
- Joined: 10 May 2006 0:09
- Location: new york usa
-
Return to Got Questions? - Ask Beginner Hobby Lockpicking Questions Here
Who is online
Users browsing this forum: No registered users and 6 guests
|